A must use oil additive on all aircraft oil changes!

Can buy this product from Spruce cheaper and have it delivered faster than I can from my own country (Australia). It takes 4 days to get from your door to mine - Australia Post couldnt deliver it from the next suburb to me in that time. Thats one reason why I keep coming back.

Camguard is a great product that checks out with EVERYONE you talk to about it. I dont change the oil in my IO-540 without adding a pint at each change. Just be careful not to order more than you plan on using in a years time frame as it has an expiration date printed on each bottle.

Works as advertised. My engine is at TBO and Im using this as some added protection, which has been corroborated by my mechanic who says its still a healthy engine.

The five stars are really for ACS and their customer service. As for the cam guard, I believe it has benefits but really have no proof. When I buy a case of Phillips 20w50 I open each bottle and add the 1.6 oz I think it is per qt? to every bottle and mark the bottles. Dont have to measure every time I add. Theres enough space in a full bottle to take the Cam Gaurd and leave some air space.

Order completed and delivered on time and perfect.

Bought an IO-390 equipped RV-7A several years ago which the previous owner didnt fly much. Iron was in the low 20s according to Blackstone and started using CamGuard after purchase. Iron dropped to 10-11 and is consistently in this range. Cant say enough about this product and its benefits for engines in high humidity environments and for those seeing irregular use.

Use this all the time. Never had an engine problem

Great product, recommended by many and it really does work. This is not snake oil. :-)

I always use 1 bottle at every oil change. Independent studies have concluded that the additive aids in protection and reduces corrosion.

I figured this stuff was snake oil at first, but tried some after a recommendation from someone I trusted. I cast a critical eye on my next oil analysis, and was very pleasantly surprised to find the wear metals to be greatly reduced. Cut in half, actually. So, I use it now!

Good stuff. Quick shipping

As always no problems. Thats why I purchase from Spruce.

I started out several years ago using a/s 15w50 in my io360l2a lyc in my 172s and really had no problem with it. with 300hrs on engine since new, it used about 1qt every 15 to 20hrs. after a few years with about 800 hrs on engine, I decided to start adding cam guard as per instructions on bottle. ( 1.6oz per qt ) within 25 to 30 hrs , all the sudden I was using 1qt pr 7hrs. I called Ed Collins,(cam guard) and told him what happened. he told me he had heard of this before and suggested switching to phillips xc20w50. after a couple of oil changes using the xc and camguard, my oil consumption has gone down to about 1qt per 12hrs. with a little over 1000 hrs on engine. my oil stays fairly clean and compression as always around 78/80 . aeroshell says you dont need camguard with their oil so who knows??? jst fyi !!! Ill probably stay with camguard and phillips.

Noticed immediate difference in my engine Would not run without it

Use it on the last oil change of the year for float flying before storing the plane away for the winter. I also use it on the Ski Plane during winter months as burning moisture off can be very challenging. I have no proof it actually helps however if you get that stuff on your tools good luck getting it off. Very protective oil indeed.

Im not sponsored by Camguard, but I wish I was. This sh1t is magical. Not only does it slow down internal corrosion, which is a major killer of privately-owned Lycomings, it also reduces valve sticking. Magic. I like to use 10% so I can smell it on final when I pull the throttle back.

Been using this since I first bought my airplane. Engine has 2800 hrs and still running strong with good compression and burning little oil.

I have been using Camguard in my Cummins diesel for 6 years. Best additive out there to replace the zinc and phosphorus that is being removed from all oils.

Ive been using Camguard for several years now and Im convinced that it prevents corrosion on engines and extends life on engines that might not be flown as much as they should be.

Great stuff! Always recommend. Even more so when engines sit for extended periods of time.

Provide this additive for a number of customers. Excellent protective coating for metals.

Good so far, been using it for 8 months now

Customers as well as mechanics like this product.

My instructor told me yesterday while we were flying my Piper Cherokee which I decided to try Camguard in that he was sold on Camguard. I guess I wont know for sure it did its thing until the hundred hour but the plane has run perfectly and cooled well since we put the Camguard in.

I have to believe that Camguard extends the life of my Lycoming engine although I have no proof.

Is Camguard the same as Motorkote? I have put a drop of each on a paper towel, and they certainly look and feel the same. There is not much of a savings going with Motorkote (available at Wal-Mart) at $26 for 20 fl oz over Camguard from Aircraft Spruce. So I stick with Camguard, but I cant help but wonder if its not exactly the same stuff. Another thing. I do not believe that you have to use Camguard at every oil change. I change my oil and filter every 25 hours, and believe that it lasts up to four oil changes. So my opinion is, what ever you use, do use something. For I feel that an anti-corrosive, anti-scuffing agent is well worth the money. I dont fly without it.

great stuff! we have it in every engine that we own.

Very pleased with the prompt shipping.

Great product add a pint for my Winter oil change. Wouldnt be without CamGuard.

I have to admit that Im generally in the camp of additives are complete snake oil. But Ive been using CamGuard for 2 years now and every time I do an oil change I do oil analysis. Each time Ive done it, my numbers get better. Last time my 2500+ hour engine is showing in the green for all wear metals. So Ill be using CamGuard every time.

In my opinion one of the best products there is to prevent internal corrosion from inactivity in A/C engines. Have not changed oil without it in years.

Camguard oil additive makes a remarkable difference in high-output large-bore aircraft engines. In my turbocharged Piper Mirage, it has cleaned up piston rings, oil does not get black and smelling anymore. I like Camguard with less-expensive Phillips X/C which has no synthetics.

Have been using for years. wont run without it.

There are so many variables in keeping an engine running well it is hard to tell what the impact is from any one maintenance initiative. I overhauled my C85 with new ECI Titan cylinders 7 years and 800 hours ago. I went through great pains to break in my engine properly and have used Phillips 20/50 with Camguard since the 25 hour mark. Just did my annual and my engine tested out to 80 over 80 on three cylinders and 79/80 on the fourth...COLD. And that is essentially the results I get every year. I change my oil every 25 hours and send samples out to Blackstone for analysis at least twice a year. Wear metals always test out nearly perfect. Did Camguard help get me here? I think so and based on my experience I would highly recommend using it.

I only get to fly on weekends. I use this at every oil change and when I add oil. Helps to prevent corrosion---especially important in FL.

Always use it at every oil change. It is supposed to be the best additive available according to independent tests.

I have used this product for a long time and I believe it aids in reducing lifter ware and pitting in engines that are used infrequently.

Have read only good reviews about this product. First time user.

Great product......

Fast convenient service

Good stuff

I have asked a number of people about the need for this additive. Some say its the greatest thing since sliced bread, others say its a placebo. No one says it is detrimental. The engine overhaul company I used recommends straight Aeroshell W80 for September-to-May use and Aeroshell W100 for summer. Having a medium twin, my aircraft takes 5 gallons of oil per oil change, so I purchased a 55 gal drum of W80. The summer change I purchase 12 quart cases. The previous owners used Camguard ... If youre going to use it, purchasing in quantity is more economical.

Hands down, best and cheapest insurance policy to maintain engine longevity on an engine that is owner-flown. A flight schools plane sees regular use and wouldnt benefit from this. But if you fly once a week or less, YOU NEED TO USE THIS. I run this in addition to the AD-required LW16702 Lycoming Additive for my C172N O-320-H2AD engine. Some say its a waste and Im paying twice for protection - but the LW16702 is anti-scuff. Cam Guard keeps the oil on critical surfaces (cam lobes and bearings, tappets, cylinder walls) longer to help keep corrosion at bay.

Well recommended by Mike Busch

I liked the product but one of the four bottles was leaking. I wish it was packaged better.

Been using this for years. I really think it helps.

Good product received ok.

This seems to do what it claims...protects steel and iron from rusting.

I have been doing oil analysis on this engine since the rebuild. Once I started to add the camguard the wear metals dropped lower along with the aluminum and chrome. This tells me that it is reducing rubbing wear and corrosion. I change oil and filter every 35 hours and fly about 100-150 hours per year for business. I am a proponent of preventative care to keep me from getting stranded, and reducing my operating cost. The lab has comment on how good the oil samples look, so they are confirming my evaluations.

Great price

I strongly believe this additive has put years on my engine.

I believe that Camguard is an important oil additive for my Lycoming engines and I have faithfully used it for many years.

got what i ordered and it came fast

Ive used this before, on multiple recommendations, but had three engine teardowns because of galled cam & lifters, the last at 1,400 hours. Changed engine after the third problem. Using CamGuard the entire time. Package arrived early with no leaks. I wish the Alcor TCP wouldnt leak. Every TCP order has had some leakage - in the new quart cans. Never was a problem in the old cans, either quart or (no longer available) gallon. But, thats the TCP rant.

Iâ??m based out of the Houston area with my hangar less than 12 miles from the Gulf Coast. Since I started using CamGuard Aviation Oil Additive Iâ??ve seen significant reductions in wear components in my oil analysis. Iâ??m convinced that CamGuard is helping to reduce corrosion and protect my engine. Gary VanDyke

Should be part of every oil change and any time oil is added between oil changes. Nothing is more important than keeping those moving parts well lubricated and protected.

OUTSTANDING SERVICE....AS ALWAYS!!

I used Camguard on my last engine only in the winter months. It needed a top overhaul at 1100 hours. Im using it year round on this new engine. Well see.

One of the 4 bottles leaked and just about got by the outer plastic wrap. Iâ??m happy that you take extra care to prevent contaminating adjacent products in the box.

Great service from Spruce. Been using this in a C182S for years now, Highly recommended.

One of the best aviation oil additives there is around. I use it in my aircraft and recommend it highly to my customers. This especially true during the winter months when many of the aircraft sit idle in their hangars.

use this all the time.