This pitot has 2 globs of which will show externally. It could have easily been welded so it would be inside the wing. The mounting holes werent positioned well either. Ill be repairing it before installation. This is not the fault of Aircraft Spruce.
Tim
21.08.2020
Product is as exactly as advertised and was sent out on time just donâ??t use the post office for delivery
Ответ:The length on the long side with the flange is 9-34" total. The length after the 90* turn is 4-1/2". OD of the flange is approximately 1/2" and the flange sits 4-3/8" from the top of the tube.
Ответ:The length on the long side with the flange is 9-3/4" total. The length after the 90* turn is 4-1/2". OD of the flange is approximately 1-1/2" and the flange sits 4-3/8" from the top of the tube. It is attached to the shaft.
Ответ:Per the manufacturer: 1) thickness is .250. 2) 5/8 3) .136 +/- .005 DIA THRU HOLE, 100 DEG X .250 DIA, 4 X 90 DEG X 1.100 DIA 4) NO 5) .255 +/- .005 6) HOLES CONFIGURED FOR A .125 DIA MS20426 RIVET 7) The tubes are already bent to 90 degrees 8) No info 9) No info, the aluminum tubing is welded into place