Micro 1000 Cht Gauges 2-1/4

от 28601 23443 руб.

до 28832 23633 руб.

Наличие: Проверяйте наличие по каждому товару

Типы

Артикул	Название	Цена за ед.	Кол-во	Цена
10-01425	2" CHT PYROMETER GAUGE	28601 23443 руб.		00 руб.
10-01426	2 1/4" CHT PYROMETER SQUARE KI	28832 23633 руб.		00 руб.

Итого: 00 руб.

Overview

Superior to any other type of pyrometer available. Unlike competing brands, these units are temperature compensated. That is, when the ambient temp. changes, MIRCO-1000 pyrometers still read the same. And we guarantee that, when properly installed, these pyrometers will be accurate within 2%. Like other Micro1000 gauges, these units come with our standard 2-year warranty. Order gauges, probes, and extension leads separately. Scaled 0-600 F.

Добавить отзыв

Van B 30.06.2019	It is great to be able to afford a CHT gauge that is compensated for ambient temperature. Thank you for carrying it! Van Baehr
Bruce S 29.01.2019	Initial installation instrument read 200 degrees in 60 degree hangar. Almost any heat applied to probe would send it off scale to high side. Returned instrument for evaluation. Two months later received instrument that seems to work. No idea if the replaced instrument or repaired the one we sent in.
Charles H 31.03.2020	The terminals on my Micro 1000 gauge end of the extension lead were crimped on incorrectly... i.e. the red negative wire had the terminal that only fit the positive gauge connection and, of course, the purple positive wire had the terminal that only fit the negative gauge connection. (one side is male, other side female). I had to snip off the incorrect terminals on the extension leads and crimp on the correct ones, I hooked them back up (in correct order) to the CHT gauge, and voila! the gauge worked. I still give this product 5 stars because of its quality and accuracy!

Van B

30.06.2019

It is great to be able to afford a CHT gauge that is compensated for ambient temperature. Thank you for carrying it! Van Baehr

Bruce S

29.01.2019

Initial installation instrument read 200 degrees in 60 degree hangar. Almost any heat applied to probe would send it off scale to high side. Returned instrument for evaluation. Two months later received instrument that seems to work. No idea if the replaced instrument or repaired the one we sent in.

Charles H

31.03.2020

The terminals on my Micro 1000 gauge end of the extension lead were crimped on incorrectly... i.e. the red negative wire had the terminal that only fit the positive gauge connection and, of course, the purple positive wire had the terminal that only fit the negative gauge connection. (one side is male, other side female). I had to snip off the incorrect terminals on the extension leads and crimp on the correct ones, I hooked them back up (in correct order) to the CHT gauge, and voila! the gauge worked. I still give this product 5 stars because of its quality and accuracy!