Tight Fit Drill Kit

Артикул: 12-01334

17917 14931 руб.

Наличие: – Есть в наличии у нашего поставщика. Доставка на наш склад в течение 5...6 недель после оплаты Вами заказа.

Оплата и доставка

Overview

Space, every inch of it, is at a premium in aircraft design as shape and weight is critical to function. Also, airplanes are riveted together which requires thousands of holes to be drilled in difficult locations without scratching or marring the work surface. So, engineers needed to design a versatile "chuck-less" drill attachment that could reach into very confined areas.

The answer was found in putting threads on the shanks of drill bits. The benefits are significant. Threaded drill bits eliminate the need for a chucking mechanism. Freed of this restriction, it is possible to do a wide variety of jobs in places with extreme space limitations (less than 1" x 2"). Chuck slippage is all but eliminated while the precision mating angle between threaded drill and drive spindle insures concentricity. Drill bit change times are reduced, an exact working drill bit length is insured and the chance of marring or scratching the work surface is greatly reduced.

The Model 00105 Kit includes: a versatile close-quarter Right Angle Drill Attachment capable of drilling up to 1/4" diameter holes and compatible with all standard power drills, a 6" Threaded Extension for those deep hard-to-reach spots, a Chucking Spud which allows direct use of threaded TightFitÂ® drill bits and extensions with your standard drill motor, five aircraft quality threaded TightFitÂ® drill bits (Short Drill Bit Set, 00133), a Tight FitÂ® 3-Way Wrench, and is packaged in a red, heavy-duty, blow-molded storage case.

Jim M 29.08.2019	Does what it says it will and it fits in some very tight spots. Dont think i drilled more than 20 #30 or #40 holes before the gear train stripped out to the point where it was no longer useable. Guess at $50 its to be considered a disposable item just like the drill bits it drives.
Nathan 04.10.2018	At first it was working great but just after drilling about 4 holes it began to get loose and start to slip. Anyways didnt even make it half a day of drilling and stripped all the way out.
Frank 03.07.2018	drill is very well made and exactly what I needed to get into tight spots
Daniel L 13.11.2017	Handy for getting into small places, but a small body, right angle drill would be a much better purchase. Difficult to manipulate the handheld drill, the tight fit drill, and the work piece with only two hands and the entire unit is long and awkward with the handheld drill attached. The gears in my unit stripped, making it unusable. New gears are available from the manufacturer, but are almost as costly as a new drill unit. I only used the tight fit for casual use in my hobby shop when my regular body right angle drill wouldnt fit.
Ralph 12.06.2017	The tool its self is as it is described. It is not as easy to use since it is small and hard to hold in a tight fitting place. Holding a separate drill motor and supporting the tight fitting drill to hold it in alignment is an acrobatic nightmare. Might be much easier to use if the drill motor and this unit were one so that the alignment can be better controlled. This is a step up to a more expensive unit but may be money well spent.
James I 08.02.2019	Well, I almost got the airplane finished before the gears stripped out in the head. I did not use it often, and made sure the gears had grease, and When you need it you really need it, but itÃ¢??s not robust. I wonÃ¢??t give it a lower rating though as for fifty bucks, itÃ¢??s almost disposable.