T-88 Structural Adhesive

от 4182 3428 руб.

до 28409 23286 руб.

Select Size:

Overview

T-88 is a non-brittle structural adhesive which gives superior finished results even when used under adverse working conditions. T-88 will cure in temperatures as low as 35Â°F which makes it an excellent choice for homebuilders living in colder climates. It is recommended by the builders of many types of homebuilt aircraft and is excellent for bonding aluminum, steel or wood. When fully cured, it is not affected by water, oil, gasoline and most other chemicals.

Добавить отзыв

Frank H 19.09.2019	as always fast great services Thanks
James G 01.08.2019	This was my 3rd order of epoxy for my VMAX build , product has never failed in strength, consistently easy to mix and works exactly like its purpose.
Arild 30.07.2019	When cured the adhesive is extremely tough. Ive used it plain and with thickening agent with great success
H. S 25.07.2019	Great service and good packing
Mel B 21.07.2019	I have used this before. Great product.
Diana K 22.03.2019	Such fast service and great communication. Thank you.
Robert S 24.09.2018	Great product. Very strong. Quick shipping
Gordon R 20.08.2018	I needed some adhesive (epoxy or other) which would adhere firmly to aluminum. A bit of research let me to this product. Surface preparation is important (remove oxide layer) but it has stuck very well I did not attempt peel or tension tests on it, relying instead on the manufacturers data, but I am very pleased with the results.
Brian W 10.12.2017	Have seen clamping tests done by my father with under, nominal and over clamping of aircraft spruce. In all cases the wood failed before the T-88 bond did. This is really good epoxy, which Ive personally used in many building and repair jobs. I want more of it!
David D 06.10.2017	Good glue, but it can make a mess if someone leaves the top off and then turns over the bottle.
Forrest 14.11.2012	This epoxy is very versatile for building wood aircraft. It has a wide temperature range for curing and the manufacturer claims the joint strength is not affected by clamping pressure or lack of. Does not smell when mixed and msds sheet lists no known carcinogens or harmful effects to skin or lungs. Latex gloves are strongly recommended due to allergic reaction with skin over time. Use with System Three Clear Coat to seal soft woods prior to gluing. Full joint strength is still maintained according to manufacturer. They sent me an email to confirm this. Their tech support is very helpful. Viscosity of T-88 changes quite a bit from changes in ambient temperature. Dries slow (overnight cure) so it might prevent you from doing as much as you planned each day. Perfect if you only have time to build one rib a day!
Alberto 14.03.2020	5
Aircraft B 02.04.2020	Dont like the new bottle caps with no nozzle for dispensing the mix on quart mix bottles
Malcolm C 14.04.2020	Did not want to run out of glue with the pandemic, would have gone mad with nothing to do. Once again you came through on time and well packed. thank you....
Chip H 23.05.2020	Excellent product excellent service
Gary G 22.05.2020	I would have given it 5 stars but the bottles came with no spouts as shown in the catalog.
Paul A 28.07.2020	Been using T-88 since around 1970. (Long before Aircraft Spruce marketed it.) Always got good wood tear on compressive shear coupons.
Erik W 10.08.2020	Amazing structural epoxy I can see why so many recommend it for aircraft use. I will now always have some available.
Robert A 08.10.2020	awsum,
Ian T 16.10.2020	Works very well for itÃ¢??s purpose
Raul E 09.12.2020	This is a great product works as advertised