Camloc 2700 Studs

от 136 112 руб.

до 4757 3900 руб.

Наличие: Проверяйте наличие по каждому товару

Типы

Артикул	Название	Цена за ед.
06-02324	27S3-2S CAMLOC STAINLESS STEEL STUD	3952 3240 руб.
2700-1	CAMLOC FASTENERS 2700-1 STUDS	2823 2314 руб.
2700-10	CAMLOC FASTENER 2700-10 STUDS	1987 1629 руб.
2700-11	CAMLOC FASTENERS 2700-11 STUDS	1537 1260 руб.
2700-11S	2700-11S CAMLOC STUD SS	3503 2871 руб.
2700-12S	2700-12S SS CAMLOC STUD	2907 2383 руб.
2700-1S	CAMLOC FASTENER 2700-1S	1611 1320 руб.
2700-2	CAMLOC FASTENERS 2700-2 STUDS	2238 1834 руб.
2700-2S	CAMLOC FASTENER 2700-2S	1119 917 руб.
2700-3	CAMLOC FASTENERS 2700-3 STUDS	2196 1800 руб.
2700-3S	CAMLOC FASTENER 2700-3S	2876 2357 руб.
2700-4	CAMLOC FASTENERS 2700-4 STUDS	1454 1192 руб.
2700-4S	CAMLOC FASTENER 2700-4S	1443 1183 руб.
2700-5	CAMLOC FASTENERS 2700-5 STUDS	1830 1500 руб.
2700-5S	Быстросъемный крепеж Camloc 2700-5S	1663 1363 руб.
2700-6	Дзус 2700-6 CAMLOC	3524 2888 руб.
2700-6S	CAMLOC FASTENER 2700-6S	3670 3008 руб.
2700-7	CAMLOC FASTENERS 2700-7 STUDS	2018 1654 руб.
2700-7S	CAMLOC FASTENER 2700-7S	1360 1115 руб.
2700-8	CAMLOC FASTENERS 2700-8 STUDS	1579 1294 руб.
2700-8S	CAMLOC FASTENER 2700-8S	1569 1286 руб.
2700-9	CAMLOC FASTENERS 2700-9 STUDS	2290 1877 руб.
27S3-1	CAMLOC FASTENER 27S3-1	2666 2186 руб.
27S3-10	CAMLOC FASTENER 27S3-10	2280 1869 руб.
27S3-12	27S3-12 CAD PLATED CAMLOC	2405 1971 руб.
27S3-13	27S3-13 CAD PLATED CAMLOC	3754 3077 руб.
27S3-14	CAMLOC FASTENER 27S3-14	3241 2657 руб.
27S3-2	CAMLOC FASTENER 27S3-2	1391 1140 руб.
27S3-3	CAMLOC FASTENER 27S3-3	1569 1286 руб.
27S3-4	CAMLOC FASTENER 27S3-4	1778 1457 руб.
27S3-5	CAMLOC FASTENER 27S3-5	826 677 руб.
27S3-6	Крепеж Camloc 27S3-6	4757 3900 руб.
27S3-7	CAMLOC FASTENER 27S3-7	3869 3171 руб.
27S3-8	CAMLOC FASTENER 27S3-8	2855 2340 руб.
27S3-9	CAMLOC FASTENER 27S3-9	2060 1689 руб.

Итого: 00 руб.

Overview

2700 STUD LENGTH SELECTION
Total material thickness ?G? consists of the thickness of all materials to be fastened. This must include the thickness of the material ?P? to which the stud assembly is attached, the material ?F? to which the receptacle is attached plus gaskets (if used) and allowance for paint or other protective finishes. If the total thickness is near the upper limit of the stud grip range, the next longer stud should be used. This will still maintain positive locking of the fastener under vibration.

P (panel thickness)..................... .062
F (frame thickness................... + .062
GRIP (total thickness).............. = .124

STUD SELECTION TABLE Using 212-12 Receptacle
Total Grip Thickness	Use 2700
.020-.059	2700-1
.060-.089	2700-2
.090-.119	2700-3
.120-.149	2700-4
.150-.179	2700-5
.180-.209	2700-6
.210-.239	2700-7
.240-.269	2700-8
.270-.299	2700-9
.300-.329	2700-10
.330-359	2700-11
.360-389	2700-12
.390-.419	2700-13
.420-.449	2700-14


2600, 2700 SERIES RETAINING WASHER Retaining washers are required for studs of -5 length or greater. Use split washer 2600- SW2 where it is desirable to have the stud fall away for minimum internal projection. Use internal tooth washer 2600-LW where it is desirable to retain the stud assembly rigidly.

PN 2600-SW-2 $1.01	PN 2600-LW $0.29

2600, 2700 SERIES RECEPTACLES

Rivet Holes	2600, 2700 Series Part No.	Price
Plain	212-12N	$2.75
Countersunk	212-12ND	$3.95

Добавить отзыв

Jamie A 09.09.2019	Fit my C182p cowl perfectly.
Ken 03.03.2019	Worked perfect. These were used on a Mooney 231 cowling. The -4 are used on all attachments except rear mist which are -7.
John 11.03.2018
Don C 06.02.2020	Great service !
Nicholas M 05.08.2020	Great fasteners. Do the job with easy release.
Steve U 03.10.2020	Good news/ bad news: The good news is that the 27S3-2 faster fits my 182 cowl well. The bad news is that the catalog info was poor and I had to order 4 different sizes in order to understand the sizing system. Also ordered both kinds of lock washers for the same reason.
Nick 27.10.2020	Camloc worked like a charm for replacing the one I misplaced.
Albert H 20.10.2020	Be aware the measurement from the top of the faster head to the horizontal part that does the fastening is somewhat ambiguous. The diagram could be more clear as to this distance on each part. I ended up ordering six different pieces before I got the correct Camloc since I was guessing. The Camloc functions perfectly now that I have the correct size.
Tom W 02.11.2020	Ordered wrong ones,returned them and ordered correct ones. No problems ,happy customer.
Steve U 09.12.2020	Very difficult to determine correct size from Spruce catalog. I ordered several examples and went by trial and error. The size on the old part is frequently unreadable.
Alan L 07.12.2020	I ordered the wrong size. The ones I got were too small so I sent them back with one of mine here so you could personally match it. I mailed it last Monday Alan
Arthur P 03.12.2020	On these quarter-turn fasteners 2700-x, the last digit, the x is embossed into the top of the fastener, the top of the screw-head. I, like many others no doubt, lost one of my fasteners, and wasted time, $, and effort trying to determine the correct size. Please make mention of this fact in your description, for the benefit of others!