Easa Part 66 Module 07 B1 / B2 - Maintenance Practices

от 12601 10501 руб.

до 16050 13375 руб.

Наличие: Проверяйте наличие по каждому товару

Типы

Артикул	Название	Цена за ед.
13-16201	EASA MODULE 07 - MAINTENANCE PRACTICES	16050 13375 руб.
13-22420	E-BOOK MAINTENANCE PRACTICES EASA B1 MODEL 7	16050 13375 руб.
13-23224	EASA MODULE 07A MAINTENANCE PRACTICES - B2 EDITION EBOOK	12601 10501 руб.
13-23225	EASA MODULE 07A MAINTENANCE PRACTICES - B2 EDITION PAPERBACK	13748 11456 руб.

Итого: 00 руб.

Overview

Aviation Maintenance Practices covers workshop procedures and the daily skills required of the aviation maintenance technician, From tools and test equipment, to sheet metal work, to drawings, fits & clearances, to building wire harnesses; each topic is explained in step by step detail. You will learn by understanding concepts, not just rote memorization and you will learn how and why each skill is useful in the day-day tasks of the aircraft technician in an aviation maintenance environment.

This book is fully compliant as EASA Part 66 module 7 for the B1 license and has been given approvals by numerous EASA based civil aviation authorities.

7.1 Safety Precautions - Aircraft and Shop

Safe working practices including around electricity, gases, oils, and chemicals. Action in case of fire and knowledge of extinguishing agents.

7.2 Workshop Practices

Care and control of tools and materials; allowances and tolerances; standards of workmanship. Calibration of tools and equipment.

7.3 Tools

Common hand tools and power tools; precision measuring tools; lubrication equipment and methods; functuion and use of electrical test equipment.

7.4 Avionic Test Equipment

Operation, function, and use of avionic general test equipment.

7.5 Engineering Drawings and Standards

Drawing types, symbols, dimensions, tolerances, and projections; title block information; microfilm and computerized presentations. ATA Specification 100. ISO, AN, MS, NAS, and MIL standards. Wiring and schematic diagrams.

7.6 Fits and Clearances

drill sizes, classes of fits; schedules of fits and clearances for aircraft and engines; limits of bow, twist, and wear; standard methods for checking shafts, bearings, and other parts.

7.7 Electrical Wiring Interconnection System (EWIS)

Continuity, insulation, and bonding techniques and testing. Use of hand and hydraulic crimp tools. Testing crimp joints. Connector pin removal and insertion. Co-axial cables, testing and installation. Identification of wire types, inspection criteria, and damage tolerance. Wire protection techniques; cable looming and support; cable clamps, protective sleeving including heat shrink and shielding.

7.8 Riveting

Riveted joints, spacing and pitch. Tools for riveting and dimpling. Inspection of riveted joints.

7.9 Pipes and Hoses

Bending, belling, and flaring aircraft pipes. Inspection and testing of pipes and hoses. Installation and clamping of pipes.

7.10 Springs

Inspection and testing of springs.

7.11 Bearings

Testing, cleaning and inspection of bearings. Lubrication requirements. Defects of bearings and their causes.

7.12 Transmissions

Inspection of gears and backlash. Inspection of belts, pulleys, chains, and sprockets. Inspection of screw jacks, lever devices, push-pull rod systems.

7.13 Control Cables

Swaging of end fittings. Inspection and testing of control cables. Bowden cables, aircraft flexible control systems.

7.15 Welding, Brazing, Soldering, and Bonding

Soldering methods and inspection. Welding and brazing methods, and inspection. Bonding methods and inspection

7.16 Aircraft Weight and Balance

Center of gravity/balance limits and calculation and use of relevant documents. Preparation and weighing of aircraft.

7.17 Aircraft Handling and Storage

Aircraft taxiing, towing, and associated precautions. Aircraft storage methods. Refueling and defueling procedures. De-icing and anti-icing procedures. Electrical, hydraulic, and pneumatic ground supplies. Effects of environmental conditions on handling and operation

7.18 Disassembly, Inspection, Repair and Assembly Techniques

A) Defects and visual inspection; corrosion removal, assessment, and reprotection.
B) general repair methods; aging, fatigue, and corrosion control programs.
C)Non-destructive inspection including penetrant, radiographic, eddy current, ultrasonic, and boroscope methods.
D) Disassembly and reassembly techniques.
E) Troubleshooting techniques.

7.19 Abnormal Events

Inspection following lightning strikes and HIRF penetration. Inspections following heavy landings and turbulence.

7.20 Maintenance Procedures

Maintenance planning; modification procedures; stores procedures; certification/release procedures; interface with aircraft operations; inspection and quality control assurance; control of life limited procedures.