A great value. I was expecting more random lengths but almost the entire 40# was in 4 lengths and a good mix of width and thicknesses. I am starting to build small musical instruments and this will be perfect as well as for other craft projects.

Nice spruce pieces. Fast delivery too!

great deal!

Very nice assortment of wood. would have liked a few wider pieces, but all in all very happy.

A few hours after I ordered I got a nice call asking me if I was OK with high UPS shipping charge for this bundle. Trust me, you want this! When I saw and opened the huge box and great mix of wood inside I was thrilled. I was intending to using this for my RC airplane models but I also do general woodworking and much of this will also find a role in projects I didnt expect. Thank you!

I received over 23 lbs and most of it looks quartersawn. Very satisfied!

I also am a luthier and was just looking for supplies for random bracing and repair. I was pleasantly surprised but the quality of what I received. All but one of the smaller boards was cut on the quarter and had tight grain. I can even see using some of this for primary tone wood for tops.

Im giving this 5 stars because the wood you receive is aircraft grade and usable in home building aircraft. I tend to find that these bargain bags are always filled with a nice selection of different stock and any blemishes in the wood (so far) have been circled in pencil so that the builder is aware of them. Ive so far been able to find a use for all of it. I made corner blocking, rib stock, uprights and a few other odds and ends for my plane from a single bargain bag. From now on when I order wood from ACS, Ill always order a bargain bag with it. It is very useful.

I have been a modeler of historical ships as well as full sized sailing dinghies, a canoe and an Adirondack guide boat for 85 of my present 95th year age. and was a member of the Nautical Research Guild. I have used cutoffs of your Aircraft Spruce Co.s. spar cutoffs and you should do ad,s with N.R.G. I quarter spars a bit over-sized lengthwise and epoxy 2 pieces hollow curves together & resulting spars stay straight!!

A good bargain. Well worth it!

I bought 4 Bags of Spruce and everyone was a very generous 20lb+ box. Because of the size and weight, shipping may seem a little pricey, but I think it was still well worth it. Every single piece will be usable for my model building. The quarter sawn lumber has a very tight, straight grain. Using my new precision micro table saw, I produced great 1/8 square strips. I can not say enough about this item. Outstanding!

I am building guitars and use spruce for braces and other things such as laminating sides. This stuff is great. Almost all usable for my work. Thanks

What a great surprise! When you buy a bargain box it's usually a buyer beware situation. Not so in this case. I got an excellent selection of usable wood in record time. Well picked and well packed. Thanks for taking care of a first-time customer. I'll be back soon!

I build custom stringed instruments. This assortment (I've bought a few) has the most amazing variety of sizes. I've been able to use the wood for bracing, jigs and fixtures and also for soundboards for small guitars and ukuleles. The fine clear grain on this wood is simply stunning, especially for the price. This is definitely one of my secret sources! Thanks so much. Julian Dale Barton Barton Guitars/ Barton Winds

It is what it is...A Real Bargain of some fine spruce wood

Im a model builder and most of what I prefer to build would be called stick and tissue/silkspan type models from scratch. This Bargain Bag of Spruce is truly a BARGAIN. I have a precision micro saw and I cut the spruce down to 3/16 square or even a little small at times for the models. The grain is amazingly straight and tight. I generally do not use balsa for spars and longerons as I prefer the strength of spruce with very little added weight. One box will produce hundreds and hundreds of strips. I wish I could buy balsa this way but I have nothing. I bought 3 boxes so far and ever one was OUTSTANDING.

A great deal! Fantastic for my music box projects!!! Beautiful boards of spruce. Highly recommended.

Great bag of spruce

Just received my bargain box of spruce and I am ecstatic! I sent them a special request after submitting the order, because I had forgotten to add it when purchasing. I had honestly been stressing so much over it, not knowing what to expect. My worry was needless, as they went above and beyond what was expected and also all the wood pieces look great! Thank you so much!!! Youâ??ve made my day!

Very nice stuff, measured out at 0.45 gms/cm^3 and 12 GPa. Right on the money. Iâ??m using it for guitar bracing. Widest board was 7â?, quarter sawn and perfect for small instrument tops. Better quality than bracing wood bought through the usual luthier supply houses.

I assumed out of 25 pounds of wood, I would get some useable and mostly knotted ends of scrap. Not the case...absolutely everything is usable in some way and out of the whole batch, only three small pitch pockets easily worked around. Some nice large, 1â? thick boards and all the way down to a little 1x1-1/4x 1â??. Very happy

I am a luthier- and this is a steal. Itâ??s honestly criminal how good the wood is and how cheap it is. Clear and tight grain, on a bargain. Good for soundboards, bracing and even necks. I will buy again for sure.

I bought wood for soundboards to use in ukulele construction. Wood is supurb for that. As good as you can get from Luthier Supply Houses and much much cheaper. Promp fulfillment and shipping too. Im thinking of ordering more before the word gets out!

Even with shipping cost more than the product, I was so pleased at the quality. I canâ??t stop staring at the pieces! Gorgeous! If they were 7.5 inches wide I would resaw for guitar tips. My complaint - most of the pieces were 1 cm thick, not thick enough for guitar back and x bracing. But did I mention that itâ??s gorgeous? I have enough high quality bracing for the rest of the top braces for a batch of eight guitars Iâ??m building. I definitely will order again and hope my request for thicker stock might be heard. Having said that, what they give you will please the fussiest builder. Thanks so much!

Excellent company and service! Received my â??bag of spruceâ? and found many good pieces to use for my project. You guys are making my ultralight a/c design/build so much easier. The catalogue is my go-to source and is absolutely incredible with such a large selection of products at very reasonable prices. Aircraft Spruce is a â??one stop shopâ? for the home a/c builder! Keep up the great work... us homeys need you !! )

Nice product and packaged well as always . David E Bishop Bishop Air Service

Substantial amount of aircraft grade off cuts of varying dimensions. Excellent quality and perfect for any woodworking needs.