E-z Heat Aircraft Engine Preheater

от 42608 35507 руб.

до 48823 40686 руб.

Наличие: Проверяйте наличие по каждому товару

Типы

Артикул
Название
Цена за ед.
Кол-во
Цена
07-05315 E-Z HEAT ENGINE HEATER 270 42608 35507 руб. 0.000.00 руб.
07-00756 E-Z HEAT ENGINE HEATER 360 42608 35507 руб. 0.000.00 руб.
07-05100 E-Z HEAT ENGINE HEATER 440 110V 42608 35507 руб. 0.000.00 руб.
07-05200 E-Z HEAT ENGINE HEATER 441 42608 35507 руб. 0.000.00 руб.
07-05200-2 E-Z HEAT ENGINE HEATER 441 220V 42608 35507 руб. 0.000.00 руб.
07-05210 E-Z HEAT ENGINE HEATER 442 42608 35507 руб. 0.000.00 руб.
07-01320 E-Z HEAT ENGINE HEATER 470 42608 35507 руб. 0.000.00 руб.
07-05345 E-Z HEAT ENGINE HEATER 540 48823 40686 руб. 0.000.00 руб.
07-05345-2 E-Z HEAT ENGINE HEATER 540 220V 48823 40686 руб. 0.000.00 руб.

Итого: 0.000.00 руб.

Overview

Note: Please see "Engine Application Guide" Click Here for the correct EZ Heat model number for your application.

Preheating engines for winter operations is at best a miserable chore and at worst can be a disaster for the plane, the pilot & flight operations - until the development of the E-Z Heat Aircraft Engine Heater. The E-Z Heat was designed to provide very efficient engine heating for virtually all propeller driven aircraft. The heaters consist of a flexible synthetic pad that easily conforms to the contours of the oil pan. This pad will heat 12 qts of oil from -40° to +60°F in an hour while using approximately 300 watts of electricity. The heater is 1/32" thick. which enables the immediate heat transfer from heater to engine.

The heaters are thermostatically controlled, so leaving them plugged in overnight means the plane will be ready to go in the morning. Normally, complete pre-heating takes only 3-5 hours for the entire engine to be nice and warm. With this new lighted plug (110V models only, 220V models include no plug to allow for European outlet variance), the owner simply needs to look out the window or peek in the hangar to see if they remembered to plug in their E-Z Heat engine pre-heater. Molded into the male plug end is a newly designed light emitting diode (LED). This LED allows the operator to visually recognize if there is electrical power to the preheat system even from a distance. FAA approved for certificated aircraft.

End your cold weather starting problems and reduce premature engine wear.

E-Z Heat Installation Instructions