Sealant Gun With 6 Oz. Retainer

Артикул: 12-02922

34415 28679 руб.

Наличие: – Есть в наличии у нашего поставщика. Доставка на наш склад в течение 5...6 недель после оплаты Вами заказа.

Оплата и доставка

Overview

This air-powered, trigger controlled sealant gun will spread sealant smoothly, uniformly, and exactly where you want it. Includes body, 10 ft. hose, and 6 oz. zinc plated corrosion resistant retainer to prevent cartridge split. Hose has Hanson-style air fitting.

Добавить отзыв

N D 10.09.2020	We have a Semco sealant gun similar to this model that needed an air hose. The hoses attach to the gun with a small AN2 flare fitting (hard to fabricate with common readily available hardware and $65-$135 Depending on length with a back order wait time that was several weeks). This unit looked like the Semco, so we took a chance and ordered one thinking it might have an air line we could use and have a bonus backup Ã¢??cheap knockoffÃ¢?Â gun for the price of a Semco air line. After receiving the gun 3 days after placing the order, I have to admit that IÃ¢??m surprised and impressed. The gun is clearly a well executed copy of the Semco with the only obvious difference being that the protective housing surrounding the valve lever is cast aluminum for this model vs high impact plastic for the Semco. The parts interchange...including the air line. This gun was made in Taiwan, our Semco is USA made (which we feel is an important consideration). ThereÃ¢??s not much to these guns and IÃ¢??ve not understood the high price Semco has demanded. This is a well made, much less expensive alternative. Time will tell but it looks like it would hold up as well as the Semco.
Race V 24.09.2020	Maybe OK for occasional use or spare. The Bracket that the side pins lock in to is very soft steel. Tightening the knob can easily distort this bracket. Over time the unit starts to leak and the tendency is to overtighten the knob causing the leakage to get worse.

N D

10.09.2020

We have a Semco sealant gun similar to this model that needed an air hose. The hoses attach to the gun with a small AN2 flare fitting (hard to fabricate with common readily available hardware and $65-$135 Depending on length with a back order wait time that was several weeks). This unit looked like the Semco, so we took a chance and ordered one thinking it might have an air line we could use and have a bonus backup Ã¢??cheap knockoffÃ¢?Â gun for the price of a Semco air line. After receiving the gun 3 days after placing the order, I have to admit that IÃ¢??m surprised and impressed. The gun is clearly a well executed copy of the Semco with the only obvious difference being that the protective housing surrounding the valve lever is cast aluminum for this model vs high impact plastic for the Semco. The parts interchange...including the air line. This gun was made in Taiwan, our Semco is USA made (which we feel is an important consideration). ThereÃ¢??s not much to these guns and IÃ¢??ve not understood the high price Semco has demanded. This is a well made, much less expensive alternative. Time will tell but it looks like it would hold up as well as the Semco.

Race V

24.09.2020

Maybe OK for occasional use or spare. The Bracket that the side pins lock in to is very soft steel. Tightening the knob can easily distort this bracket. Over time the unit starts to leak and the tendency is to overtighten the knob causing the leakage to get worse.