Go-no Go Sleeve Gauge
Артикул: 13-03814
3904 3253 руб.
Наличие: – Есть в наличии у нашего поставщика. Доставка на наш склад в течение 5...6 недель после оплаты Вами заказа.
Overview
| When the proper slot in the gauge slips over the compressed area of the sleeve after swaging then your swage is satisfactory. If the proper slot doesn't fit over the compressed area of the sleeve after swaging then your tool is out of adjustment & your cable assembly will not hold the rated breaking strength of the cable which should be the result when oval sleeves are used to form a loop or eye in a cable assembly. GA-1P: Gauges all swages performed on 1/32", 3/64", 1/16" 3/32", 1/8", 5/32", and 3/16" oval and stop sleeves. |
