|
Jordan
18.08.2019
|
High quality. Expensive for a socket, but the magnet is good and strong. If the magnet keeps me from dropping just one expensive plug, then it pays for itself. I like it so far.
|
|
Mark
06.12.2018
|
Its a good socket. I wondered if the magnetic feature was going to hold the plugs properly. The magnet seems to do a good job of keeping the plug secure in the socket during removal and installation. Ive payed more for specialty sockets and Ive payed less. So, the price is what it is.
|
|
Dwight T
07.10.2018
|
This is a quality thin walled socket for spark plug removal and insertion as the magnetic feature helps guard against accidentally dropping a plug which is important with any plug--especially the expensive fine wire plugs.
|
|
Kai
28.07.2018
|
Quality appears good. Used to replace six tempest UREM40E plugs and the fit was good. I did like the magnet that holds the plug over rubber method.
|
|
Chad W
03.05.2018
|
Great socket. The magnet is a definite improvement over the old rubber grommet.
|
|
Bens M
11.03.2018
|
Great spark plug socket. Magnetic socket that hold the plug into the socket and the 7/8 end for close tolerance cowls makes it my go to economical spark plug socket
|
|
Bob
12.10.2017
|
Great socket. Works as advertised!
|
|
Don
24.04.2017
|
If you run Tempest plugs in a snugly cowled application, its almost a must. Because the socket also works on Champions you have both lines covered with one tool. When things are tight and there isnt room to get a ratchet or torque wrench in to turn the socket, use a crows foot attachment. The magnetic feature is very valuable, which anyone who has accidentally let a fine-wire plug slip from a socket understands.
|
|
Doug
15.04.2017
|
Holds the plug great and gets in where you need it..
|
|
Marc
11.03.2017
|
Works on all the engines I have tried it on. O-235, IO-360, O-470, IO-470, TIO-540, E-225, O-320, etc. Seems well made. Time will tell if it holds up to daily use. I think so. The magnet holds the plugs surprisingly well. Good fit and hold around the spark plugs and fits into cylinder spark plug recess.
|
|
Nick
13.11.2016
|
Works perfectly. Was surprised to not see a rubber grommet, but was my own fault. I didnt read carefully enough before I purchased to see that it was magnetic. Like the magnetic feature better anyhow. Works great on Tempest REM40Es.
|
|
Larry B
27.10.2019
|
This deep socket did the trick when others failed to have enough depth to fit securely. The magnetic qualities were welcome and made the tool feel much more secure when working with the fragile and expensive plugs.
|
|
Tom A
16.10.2019
|
After 25 years of changing Champion plugs with a standard deep well socket, I was surprised when the same didnâ??t work with Tempest plugs. Their design requires an extra deep well which this socket has. The magnet securely holds the plug while you get it lined up and the thin wall makes it easy to get into tight places. Itâ??s a bit expensive, but worth every penny.
|
|
Bill O
29.07.2020
|
The magnet saves plugs!
|
|
Rory
21.12.2020
|
Works as advertised - good quality, nice heft. I use it with my fine wire plugs, no issues at all.
|
