Whelen Model 71055 Led Beacon For Cessna

от 142762 118969 руб.

до 142762 118969 руб.

Select Voltage:

Overview

Model 71055 Series beacons are FAA TSO'd self-contained LED anti-collision lights. They are designed to replace existing quartz halogen flasher beacons installed as original equipment on single engine Cessna's from 1967 and later (contact factory for details). Its size (2.5" dia. x 3" high) also permits replacing remote mounted strobe lights (ref. Whelen A470 series) allowing for removal of the strobe power supply. Internal mounting plate provided with choice of mounting holes to retrofit most existing mounting patterns. STC SA615EA approved.

Добавить отзыв

Justin 09.08.2019	Installed on my C150L. Had to drill out and countersink two hold down screws on mounting plate so beacon glass cover hold down ring would mount flush to mounting plate. Otherwise a simple install. Just have to disconnect Cessna flasher in tail of plane and splice the power wire from switch to beacon to bypass original flasher. Just hard to justify $900 for this part but like all airplane parts...you want to play you really have to pay! Does not load up my alt like the original flasher, so all seems good so far.
Richard H 19.06.2019	Perfect fit with no fuss on my 76 177rg. Very bright and Im very happy with it.
Perry H 24.01.2019	Excellent product. Easy to install. Very bright!
Steve 07.12.2018	Installed on 1969 C-150J without the need for any crazy airframe modifications. Removed old flasher and beacon, minor wire work, unit installed and ops check complete. We did complete a 337 as per the Manufactures installation instructions. No bleed over in headset as last unit did. The picture is deceiving as the lens is not tinted at the top, clear all around. Recommend Spruce post an actual photo of the unit to clear that up.
Jeffrey G 05.09.2018	Installed easily and gives brilliant light. It eliminated the audio noise we were getting in our headsets from the old beacon. We did not have to fill out a 337 for the 182q. Only downside, very expensive.
Nathan V 27.08.2018	This is not plug & play. You will need molex pins & crimper and the wiring must be changed slightly with the removal of the old flasher unit. It is bright, I hope it lasts a long long time. Typ. overpriced acft part.
John 31.07.2018	1/2 hour install on my C206. Very bright both day and night.
Nathan 12.02.2018	Easy to install and very bright.
Joel P 28.04.2017	Easily installed in existing mounting area with minor modification to the existing wires. Very bright and should last longer than the aircraft.
Bill F 03.04.2017
George Y 16.03.2017	WOW! That is the best description comparing this LED beacon to the incandescent that it replaced. While you had to look at the old to see if it was on, you have to look away from this one to avoid being dazzled. Install was super easy, just need to remind buyers that if their beacon is the factory original, they need to remove the ballads resistor that it uses before installing this Whelen unit.
L W 06.03.2017	Easy replacement, plugs right in to existing hole in upper fin and uses same wires. Just a word of caution when doing the ops check: WEAR SUNGLASSES, this thing is bright!
Gabe 19.02.2017	A very good product! Nice and bright, easy to install. I recommend this beacon. It easily replaced the old bulb beacon on my 172 tail
Trevor S 09.06.2013	good
Andrey P 05.12.2019	I got everything. The parcel arrived quickly. Im hope very much that you complete and send me order #3674071 as fast. Sincerely yours, AP
Allen R 16.04.2020	Had to drill out 2 holes on the base to no 8 plus counter sink them. Spend the extra money and put this led assy in. Way over priced but works very well. Glad its tso 1970 177b
Hans U 18.04.2020	Easy install, Old Beacon and Flasher out, New Beacon uses same screw holes. Connect the wires, done. Super Bright!
William 20.04.2020	Replaced a 10yr old same model Led Whelen Beacon. New one is basically same with a few changes on LEDs. Easy to install yet gave it 4 stars being you would think other one would have lasted longer.