Poly Fiber Poly-brush

от 8751 7292 руб.

до 141982 118319 руб.

Наличие: Проверяйте наличие по каждому товару

При добавлении в корзину к цене товара добавится таможенное оформление опасного груза. Окончательную стоимость Вы увидите при оформлении заказа.

Оплата и доставка

Типы

Артикул	Название	Цена за ед.
09-04100	POLY-BRUSH QT. TINTED	8751 7292 руб.
09-04110	POLY-BRUSH UNTINTED QUART	8764 7303 руб.
09-04200	P/F POLY-BRUSH GAL TINTED	28592 23827 руб.
09-04210	POLY-BRUSH UNTINTED GALLON	28592 23827 руб.
09-04300	P/F POLY-BRUSH 5 GAL *TINTED	141982 118319 руб.
09-04350	POLY-BRUSH UNTINTED 5 GALLON	129240 107700 руб.

Итого: 00 руб.

Overview

A pink translucent, 1 part air drying resin used for the first 2 or 3 coats to penetrate and seal the fabric weave and assure good adhesion. Also used to attach the finishing tapes and reinforcing patches. Brush on initial coat thinned 3:1 with reducer. Subsequent coats are thinned 3:1 with reducer and applied with a spray gun to avoid brush marks & cut application time.
Available in tinted or untinted and in quart, gallon, or 5 gallon sized.

Important Notice: All mixed paints are special order and are non-returnable.

Добавить отзыв

K. G 03.05.2019	product was good but the can was so damaged in shipping that it was impossible to stir without a messy transfer to another can
Kent 18.01.2019	Works good, came fast and was well packaged. Hazardous shipping is brutal though.
George 19.12.2018	This stuff is great, makes a tough, attractive and nearly fireproof finished product, but it is toxic as heck so use protective equipment ALL THE TIME.
Paul 27.02.2018	I have used this product on a recent cover job and it did what it was supposed to do. Dont forget to thin 3:1 with their reducer. I like the poly-fiber system, just were a paint mask when working with it.
Jack B 10.01.2020	great service box got here in great condition fast service
Bruce C 31.10.2019	First of all, I use this on model planes (R/C) using the lite Stits fabric. This is NOT the same stuff sold by F&M. Their Poly-Brush is already thinned, since they sell to modelers. Spruce sells the full-strength stuff that you have to thin (with reducer-I used RR8500-slow drying but the finish is smoooooth!) )on your own. You need to thin it 3 to 1 or else it goes on too thick and it orange peels. But, once you thin it, its just perfect! So, you may actually be getting more product for the money with this than with the pre-mix stuff.
Edward S 17.08.2020	I had a leaking can of Polybrush delivered and contacted customer support . They had a new can at my door in 4 days no charge . It was the first time in over 40 years of doing business with you that I had a problem ... Thanks , Ed
Don L 21.08.2020	The first gallon of poly brush was damaged in shipping and leaked in the carton. When we notified Aircraft Spruce of the problem they sent me a replacement gallon. I appreciate there service for taking care of this issue.
Rich C 20.11.2020	Good product. Tried and true.