Psa Enterprises Led Tail / Beacon Replacement Lamp Only

от 18360 15300 руб.

до 18360 15300 руб.

Select Voltage:

Overview

PSA - (part #s) 936TL&B-12V or 936TL&B-24V Tail Light with Beacon (combination) assembly for replacement applications. This unit is self-contained, requires no external power supply or modifications for installation. Fits in the same foot print as your current Grimes or other incandescent tail light unit. Drawing less than .2 amps, you will save 2 amps in the circuit and gain a beacon to boot. No RFI, runs cooler and longer. Available in 12V & 24V. NON-PMA

Добавить отзыв

Warren G 29.08.2018	Metal top of lamp separated from metal bottom. Was a great lamp until it separated. Had to order another. Not warranted after more than 30 days.
Austin L 07.04.2018	Im going on 3 months with this light and its still working great! I really like that it flashes while staying constantly on in the rear, adds a level of safety that no other product has. Some people complain about the flashing part being too far back int he socket to be visible, but at night its very visible. Cheap way to add safety. If this does burn out soon, Ill replace it with another.
Rick H 13.11.2017	When they say you gain a beacon its because the unit flashes on/off. Had I known this I would not have bought.
Marc 16.10.2016	Sadly, this LED tail/beacon light only lasted 5 months in my plane.
Robert T 05.01.2020	read earlier reviews and time will tell. but initially works as advertised. nice and bright and flash portion of bulb works which you can see almost 180 degrees, depending on the mount. my piper lance because the frame around the outside glass cover blocks a little, but more like 160 degrees. for the price nothing else comes close and comparing the position lite to the bottom original no comparison.
Jim C 16.01.2020	looks to be more robust than the original, which is great. only 4 stars because the price is too high.... there is no reason that in this day and age a replacement LED should cost $80,..... ok old guy rant over
Rick C 08.10.2016	PSA Pinecone LED Lamps - In a 2002 C172R, the red and green nav-lights are of the pine coneÃ¢?Â design. These LEDs have worn out (unit lasted 13 months), LEDs have come loose due to vibration in all the units I tested (propeller aircraft have all kinds of harmonics and vibrational frequencies running through their fuselage - some more than others). From what I can tell the pine cone design has no structural support and the waferÃ¢??s are relying totally on the solder connections between them to hold them together. These various frequencies combined with a stacked moment is an invitation for something to fail if the right vibration frequency comes along. As for the tail (white) lamp, the LEDs closest to the base are too far back in the tail light socket and cannot be seen from the aft of the aircraft. The majority of the flux (light) emitted is from the top surface LEDs (right at the lens) and some light can been seen emitting from second wafer of LEDs. Any flux emitted from LEDs closest to the lamp-base are pretty much useless. Conclusion: Overall design needs more structural integrity and the circuitry is suspect. ItÃ¢??s a shame to know that the original $3.00 incandescent light bulb lasts longer than the $85 LED unit.