Uhmw Polypropylene tape 3 Inch

Артикул: 09-02561

25718 21432 руб.

Наличие: – Есть в наличии у нашего поставщика. Доставка на наш склад в течение 5...6 недель после оплаты Вами заказа.

Оплата и доставка

Overview

Provides a nonstick, low-friction surface similar to PTFE (polytetrafluoroethylene) tape but with higher abrasion and impact resistance. Ideal for chutes, packaging lines, slides, and anywhere high-pressure sliding contact occurs. Also eliminates squeaks and rattles caused by adjacent parts movement. Tape has a UHMW (ultra-high molecular weight) polyethylene film and 0.0015" of acrylic adhesive. 0.0045" thick tape has a temperature range of ?40Â° to +225Â° F and includes a peel-off polyethylene liner. 18 Yard roll (54 ft.)

Добавить отзыв

Samair P 16.08.2019	Generally unacceptable for AC usage- Isnt Transparent, but actually a pale yellow- VERY THIN, while it may be slippery, it isnt THICK by any means- EXTREMELY hard to separate from its backing during installation, and if you even breath hard the inside tacky edge, it will show through. Fingerprints on the inside look like a crime scene. After aprox 20 hours on a cessna 206 strut ( to protect from strut chafe) and tape started separating from tacky lining- Terrible- Never again-
Mark B 03.06.2017	I used this tape to replace an earlier wear tape that I had originally installed on the leading edge of the flaps where it rubs on the wing skin overhang on my RV6-A. It is thinner than the previous material that I replaced because of sun damage. It goes on very clear and smooth, seems to have excellent adhesion. I also used a thin strip under the wing skin overhang so it will only have poly to poly contact as the flaps move. I do not know how it will hold up to the suns UV so I will retract flaps when parked out at airshows. Hangar neighbor is getting some from me to use on intersection fairings on Mustang Two.

Samair P

16.08.2019

Generally unacceptable for AC usage- Isnt Transparent, but actually a pale yellow- VERY THIN, while it may be slippery, it isnt THICK by any means- EXTREMELY hard to separate from its backing during installation, and if you even breath hard the inside tacky edge, it will show through. Fingerprints on the inside look like a crime scene. After aprox 20 hours on a cessna 206 strut ( to protect from strut chafe) and tape started separating from tacky lining- Terrible- Never again-

Mark B

03.06.2017

I used this tape to replace an earlier wear tape that I had originally installed on the leading edge of the flaps where it rubs on the wing skin overhang on my RV6-A. It is thinner than the previous material that I replaced because of sun damage. It goes on very clear and smooth, seems to have excellent adhesion. I also used a thin strip under the wing skin overhang so it will only have poly to poly contact as the flaps move. I do not know how it will hold up to the suns UV so I will retract flaps when parked out at airshows. Hangar neighbor is getting some from me to use on intersection fairings on Mustang Two.