J.p. Instruments Edm 800 Digital / Analog Scanners

от 821207 684339 руб.

до 1238571 1032143 руб.

Наличие: Проверяйте наличие по каждому товару

Типы

Артикул
Название
Цена за ед.
Кол-во
Цена
10-06953 JPI EDM 800 4C W/FF 201 2-1/4 CHT BAYONET PROBES 821207 684339 руб. 0.000.00 руб.
10-02854 JPI EDM 800 4C W/FF 201 2-1/4 W/ 1 CHT ADAPTER PROBE 821207 684339 руб. 0.000.00 руб.
10-06955 JPI EDM 800 4C W/FF 201 3-1/8 CHT BAYONET PROBES 897919 748266 руб. 0.000.00 руб.
10-02021 JPI EDM 800 4C W/FF 201 3-1/8 W/ 1 CHT ADAPTER PROBE 897919 748266 руб. 0.000.00 руб.
10-06954 JPI EDM 800 4C W/FF 231 2-1/4 CHT BAYONET PROBES 821207 684339 руб. 0.000.00 руб.
10-02855 JPI EDM 800 4C W/FF 231 2-1/4 W/ 1 CHT ADAPTER PROBE 821207 684339 руб. 0.000.00 руб.
10-06956 JPI EDM 800 4C W/FF 231 3-1/8 CHT BAYONET PROBES 897919 748266 руб. 0.000.00 руб.
10-02843 JPI EDM 800 4C W/FF 231 3-1/8 W/ 1 CHT ADAPTER PROBE 897919 748266 руб. 0.000.00 руб.
10-02022 JPI EDM 800 6C 3-1/8 W/O TRANS W/ 1 CHT ADAPTER PROBE 884397 736997 руб. 0.000.00 руб.
10-06957 JPI EDM 800 6C W/FF 201 2-1/4 CHT BAYONET PROBES 952787 793989 руб. 0.000.00 руб.
10-02856 JPI EDM 800 6C W/FF 201 2-1/4 W/ 1 CHT ADAPTER PROBE 952787 793989 руб. 0.000.00 руб.
10-06959 JPI EDM 800 6C W/FF 201 3-1/8 CHT BAYONET PROBES 1030539 858783 руб. 0.000.00 руб.
10-02857 JPI EDM 800 6C W/FF 201 3-1/8 W/ 1 CHT ADAPTER PROBE 1030539 858783 руб. 0.000.00 руб.
10-06958 JPI EDM 800 6C W/FF 231 2-1/4 CHT BAYONET PROBES 1238571 1032143 руб. 0.000.00 руб.
10-02859 JPI EDM 800 6C W/FF 231 2-1/4 W/ 1 CHT ADAPTER PROBE 952787 793989 руб. 0.000.00 руб.
10-06960 JPI EDM 800 6C W/FF 231 3-1/8 CHT BAYONET PROBES 1036520 863767 руб. 0.000.00 руб.
10-02858 JPI EDM 800 6C W/FF 231 3-1/8 W/ 1 CHT ADAPTER PROBE 1036520 863767 руб. 0.000.00 руб.

Итого: 0.000.00 руб.

Overview

The EDM-800 instrument has all the advanced functions of the EDM-700, but incorporates some new features that can only be found on JPI products. No longer do pilots have to waste time looking up and guesstimating the present percentage of horsepower (HP).

There are new easy readable digits located at the top of the EDM display which continually show the percentage of horsepower being used, & can also display RPM. What is unique about this new feature is that it can also display HP over lean. HP can be displayed for either carbureted or injected engines, even if they are turbocharged. Now you can be sure that you are within the horsepower limits of your engine, and in IFR conditions, this can be quite a task.

At the present time HP is only available on single engine 4 and 6 cylinder engines. The EDM800 calculates percent of horsepower in an Over lean condition. Lycoming & Contentinal horse power charts stop at peak EGT on the first cylinder to peak. Gami has developed a method of going over lean on all cylinders. When you are over lean, every ounce of fuel is burned & used to create horsepower and heat. Cooling is accomplished by excess air in the combustion chamber. JPI has developed an algorithm to calculate horsepower based on fuel consumption and other factors.

To obtain HP in this over lean condition you must have an EDM-800 engine analyzer with fuel flow, RPM, MAP, OAT, Memory & Gami tuned injectors. In addition to JPI's HP function, EDM800 also has a Memory Module that can store up to 25 hrs. of engine data, which can be downloaded to a laptop or palmtop PC. When using the memory function, all functions of the EDM will be recorded, including Fuel Flow & HP.