Новый охладитель масла Airwolf - это 20 алюминиевых пластин, созданных для того, чтобы крепиться на любом стандартном фильтре.
Эти пластины добавляют 600 квадратных дюймов к охдаждающей поверхности и отводят тепло от масляного фильтра, тем самым охлаждая масло. Пластины анодированы золотом и легко устанавливаются с помощью двух хомутов. Легко надеть, легко снять. Все, что нужно, уже в наборе. Снизьте температуру масла сегодня с нашим озладителем!
Air flow must be in line with fins. The filter mount on the my C85 is across the fins. Did not help. Easy to install though.
When rigged with a 1 dia. blast tube, this was worth between 5 and 10 degrees (closer to 10) in oil temperature reduction between northern CA and Oshkosh this year for an O-200 in a Cessna 140. Also, the oil temperature increased/decreased noticeably slower/faster on climbs/descents. Its a very easy installation, and on that basis is worth it, but dont expect miracles.
This oil Chiller works well if well cooled. If your oil filter is mounted in an area where there is no air flow it will not work. It must be mounted where air can cross the chiller fins. In my application it netted 10 degrees and 5 psi in oil pressure. Thanks, MattJ
You will find very little hard data on this product anywhere on the internet only anecdotal observations. I decided to take a chance as my Cessna 150 is Phoenix based and red line oil temps are an always present problem on climb out in the summer. I found no reduction in oil temps with this product even using thermal paste to help to transfer the heat to the fins. The O-200/C150 oil filter installation design does not receive any direct cooling air flow so the fins only have static air to work with which limits the ability of this product to work effectively if at all. See my YouTube documented testing for more information.
10 deg drop on my Cessna 150 which is huge here in Arizona where i usually run at red line in the summer. Gained another 10 deg drop by routing the cooling air tube from my alternator to blow on the filter.
I couldnt get all fins installed because of my mounting location. I saw slightly lower oil temps with it on. I think it is a little over priced but it works.
Added this to the filter and it did not reduce temps significantly. Filter was already remotely mounted with some airflow around it. Engine is a 6 cyl geared continental.
How about some data? Has any flown with this and noted what the temperature delta's were?
Ответ:Per the supplier: The Chiller has 20 individual fins. You can use as few or as many as you want. The 108's and 109's is what its most popular on. But it can also be used on the large Fram filters for the radials.