Electroair Eis-61000-1c Continental 6 Cylinder Electronic Ignition Kit

Артикул: 08-12237

862553 718794 руб.

Наличие: – Есть в наличии у нашего поставщика. Доставка на наш склад в течение 5...6 недель после оплаты Вами заказа.

Overview

The EIS-61000 Electronic Ignition Kit is a fully STC'd kit for Continental 470 & 520, non-turbo?d, series engines, installed on single engine aircraft. Replacing one magneto with the EIS-61000 will typically improve fuel economy on average by 10-15% (operators have reported consistent fuel savings of 1.5-2.0 gph or greater). Additionally, there will be an improvement in horsepower, smoother engine operation, easier hot starts and improved high altitude performance. The EIS-61000 adjusts spark timing automatically by way of our MAP Sensor - timing is adjusted with altitude. Most parts on the EIS-61000 are not life limited (reference the I.C.A. for recommended maintenance) - this combined with reduced spark plug fouling means lower maintenance costs. This kit can be used on either 12V or 24V systems.

This kit uses a Crank Shaft Trigger Wheel for firing the ignition system. The trigger wheel is mounted on the bare crankshaft just behind the prop flange. (See Figures 1, 2 & 3)
NOTE: Minimum clearance of 0.650? between the front of the engine case and propeller studs is required. Please check this dimension before starting installation ordering the kit.

Kit includes: all the required parts to replace one magneto.