Warp Drive Advance Composite Propellers

от 147183 122653 руб.

до 382779 318983 руб.

Наличие: Проверяйте наличие по каждому товару

Типы

Артикул
Название
Цена за ед.
Кол-во
Цена
05-31950 WARP DRIVE 2-BLD HIGH HP W/HP 252759 210633 руб. 0.000.00 руб.
05-31940 WARP DRIVE 2-BLD STD W/HP HUB 206732 172277 руб. 0.000.00 руб.
05-31920 WARP DRIVE 2-BLD STD W/STD HUB 147183 122653 руб. 0.000.00 руб.
05-31955 WARP DRIVE 3-BLD HIGH HP W/HP 382779 318983 руб. 0.000.00 руб.
05-31945 WARP DRIVE 3-BLD STD W/HP HUB 240277 200231 руб. 0.000.00 руб.
05-31925 WARP DRIVE 3-BLD STD W/STD HUB 197631 164692 руб. 0.000.00 руб.
05-31930 WARP DRIVE 4-BLD STD W/STD HUB 276163 230136 руб. 0.000.00 руб.

Итого: 0.000.00 руб.

Overview

Warp Drives Advanced Composite Carbon Fiber propeller has a structural strength near that of metal propellers. Because of the stiffness achieved by using carbon fibers, the prop will do very little coning (bending forward) under power. Proper fiber placement allows the prop to flex torsionally for maximum cruise efficiency. The strongly fixed position of the blades along with optimum torsional performance translates into more thrust than conventional propellers.

The interior structure of this new propeller is all carbon fiber - no fiberglass, no foam, no filler - an all carbon fiber matrix combined with top quality hybrid epoxies.
Carbon fiber is one of the strongest building materials available. When properly engineered, carbon fiber can achieve the strength and stiffness of a metal part, as demonstrated by its wide range of industrial and aerospace uses.

Warp Drive Propeller Blade Types

All propellers and blade types are available with Stainless Steel Leading Edge protection as an option at additional cost.

1. Standard Advanced Composite Carbon FIber Blades: The Carbon Fiber Standard Blades can be used on Rotax, Arrow, VW and similar engines.
2. HIgh Horse Power Advanced Composite Carbon Fiber Blades: The Carbon Fiber HP Blades will be required for use on Lycoming, Continental and some auto conversion engines.

Warp Drive Hubs

Warp Drive offers two types of hubs of our propellers. First is our Standard Hub. This is an assembly of anodized aluminum plates and composite clamping blocks. It accommodates standard and custom hub bolt patterns of up to 3 1/8".

The second type of hub is the HP Hub. This hub consists of two halves machined from solid aluminum. It is the same weight as the standard hub assembly and can accommodate Rotax, Arrow, VW, SAE I Continental, SAE II Lycoming and custom bolt patterns.
Ordering A Propeller:
We request all applicable information below when you are ordering:

  • Name, Address, Phone Number(s)
  • Vehicle - type, make, model, cruise speed, tractor/pusher,
  • Engine - make, horse power,
  • Reduction Drive - type, ratio. If there is no reduction drive, (State Prop RPM)
  • Hub Requirements - A) Bolt circle dia, B) Number of bolts, C) Bolt dims, D) Center hole dims, E) Drive lug dimensions (if applicable),
  • Propeller Description-rotation, diameter, structural limitation of diameter manufacturers suggested prop description, no. of blades, tractor or pusher.


Click Here for Required Propeller Form