HD product. Long lasting. Very good service at your company. Thanks for the quick shipping.

Terrible product. The white sprayed nice at first then started clogging. Completely ruined the job. The other colors worked good.

This product should not even be sold at AS. You get one burst of normal paint then it comes out as a cottage cheese gloopy mess. We tried to use this in optimal conditions as far as heat and humidity and it just doesnt spray. Do not recommend.

OK, after talking with Spruce about the problem of the epoxy resin settling out of the solvent base and coming out like goop when you try and spray it, as previously mentioned, apparently cold temperatures cause the problem. Which is interesting in that I bought black at the same time and worked fine.? If you buy white please test it as soon as its received to confirm performance and store it at room temperature on its side.

I followed all of the directions as instructed. When applying the paint it would go from an aerosol spray to a thick line of spaghetti. Very frustrating experience to say the least.

The fumes are extremely strong and will cause headache almost immediately. I would only use it outdoors or in a hanger. Take warnings on label seriously.

Horrible. As someone else said, after a few seconds, the paint comes out in globs. Iâ??m now going to have to strip the paint and do it again with hardware store paint. This stuff is horrible. The can also leaks around the nozzle so I have paint all over my hands and clothes.

Can was obviously defective. Paint went everywhere but where it was supposed to go. Fortunately customer service replaced it but itâ??s too cold right now to,paint.

It works good if you keep shaking it while you spray it.. make two or three passes and shake the can two or three times

Ill give 2 stars as an average.... The first 2 cans of white came out like silly string after 10 seconds or so. The replacement from a new batch didnt have any problems. Sprayed a test piece and the pattern was good. Sprayed the prop and it was goopy and chunky. Despite the replacement being acceptable, the fact that the prop had to be stripped and painted again is the reason for the 2 stars. Aircraft Spruce had great customer service in fixing the problem, though.

I like this paint and have used it on many parts of my plane, nice spray width and consistent if you keep shaking. It takes a little more than expected so buy more than you think you will need. I have used 10 cans over the last 3 years and had no problems until the last can, test spray was good but half way through the first pass is started to sputter and get chunky, dripping out of the nozzle too, swapped to a nozzle from another can but was no help. Can was garbage. Plan to spray fair amount on the test piece for each can at the start so you dont have to strip the 3 coats you have on already to fix after a bad can.

Shook the can for one minute it sprayed about two seconds and then started splattering and running down the front of the canned dripping in the floor tried shaking another three minutes same results but Aircraft Spruce being a great company replace the paint for me

Dont buy. The gray coated the prop, but will have to be sanded and polished to get an acceptable finish. Despite extensive shaking, the can occasionally shot out globs of thick gray goo onto the paint job. When I tried to use it again one week later it refused to spray anything other than clear solvent.

The Black worked as intended. Lambert Havelka

This paint does NOT even closely match a Hartzel Prop! Also, after much shaking and clearing the spray to make sure it sprays evenly, suddenly SNOT comes out! Like silly string, ruining everything I was hoping to accomplish. Never again!

Black worked fine, went to paint the tips white and during the process the paint began to come out stingy and in gobs. Ruined the job do over.

I was surprised just how hard a spray can of Flat Black Epoxy paint was to find couldnt be had at any big box or paint outlets in my area. Delighted when I located it at Aircraft Spruce & Specialty Co. The key to any good paint job is preparation and I sanded, cleaned, and tack clothed my project to a high degree. Following directions on the can regarding application, temperature, and re-coating I ended up with results that fell far short of my expectations. The finish came out un-even some parts glossy whilst others parts look like they were dry sprayed. About the best I can say about it was: I wanted a black color and thats what came out of the can.

The product is fine and it arrived on time. However, it was the wrong item. Specifically, Im painting a propeller. It is Gray - so I ordered Tempo Propeller Gray epoxy paint. Flat black arrived. When I called your company to ask about how to exchange or make it correct, the operator said I ordered it online and its my problem. Reality check - I KNOW I ordered it over the phone because I ALWAYS order over the phone and remember talking to and order agent. My preference, which you dont carry, was for Gloss or Semi-gloss Black, similar to the finishes McCaluey propeller is using. SO, I settled for your Semi-gloss Gray. St least thats how I left the conversation. This has been my experience. John Marabella, Sarasota, FL