Princeton Capacitance Fuel Probes
от 6938 5782 руб.
до 57927 48272 руб.
Наличие: Проверяйте наличие по каждому товару
Overview
| Easy Push Button Calibration - Simple push buttons make calibration easy and accurate. Intended for Experimental Aircraft - This is not a certified unit No sensitive screw adjustments to make. Place the probe in tank, connect power and press EMPTY. Fill tank and press FULL. Calibration is complete. Steady Readings - Digital filtering minimizes the effects of fuel slosh providing greater accuracy. Proven Design - Specifically designed for aircraft that are subject to harsh environments, such as vibration, temperature, and electrical noise. Probes designed for industrial applications can fail under these conditions. Proven reliability with over 10 years of history. SAE 5 Hole Bolt Pattern - Industry standard flange mount compatible. Unique Press fit installation option - Simply drill a 1/2" hole and use a rubber bushing to seal and hold the probe in place. No Moving Parts - Nothing to wear out. Output - 0 to 5 Volts Compatible Fuel Quantity Gauges - UMA P/N: 18-260-1C1 (P/N 10-02410) Westach P/N: 20A4V (P/N 10-01255) & 2A7V (P/N 10-01246) and other 0-5V gauges. Standard Model - Round puck with SAE 5 Bolt Pattern and Press-fit Nipple. Available with 2 or 5 set points. 5 set points are used for odd shaped tanks. Probes can be shortened to 3 inches of measurable length. Optional 3 or 5 inch bendable section starting at the probe. The bend section does not measure fuel. Standard overall lengths 12, 18 and 24 inches, bend section reduces measureable portion. Custom lengths from 25 to 48 inches with a 2 week lead time. Includes a SAE 5 hole rubber gasket or Press-fit rubber bushing, specify when ordering. Optional Standard SAE 5-Hole Bolt Pattern Mounting Kit - Contains a backing plate with taped holes, gasket, AN3H-12A bolts, and washers. Advance NPT Model - 1/8" Male NPT Fitting, separate 5 set point electronics using FAKRA SMB connectors. Standard lengths of 24 and 48 inches without any bend section. Ordering bend section requires special consideration for mounting. The NPT fitting is not removable. Usually a second compression fitting is used. Custom lengths 6 to 92 inches with a 2 week lead time. Ordering Standard Model: (LL-BB-SS-MM) LL - Length (12, 18, 24 inches or 25 to 48 inches custom) BB - Bendable Section (NB= non-bendable, 3B= 3 inch, 5B= 5 inch) SS - Set points (1S= Empty, 2S= Empty/Full or 5S= Empty,1/4,1/2,3/4,Full) MM - Mounting method (PF= Press Fit Bushing, FM= Flange Mount Gasket) Example: A 12", non-bendable, 2 set point probe using a press fit mounting part number would be 12-NB-2S-PF Ordering Advanced NPT Model: (LL-BB-SS-NPT) LL - Length (6 to 92 inches) note: only 24 and 48 inch lengths without any bend section are stocked. BB - Bendable Section (NB= non-bendable, 3B= 3 inch, 5B= 5 inch) SS - Set points (1S = Empty, 2S= Empty/Full, 5S= Empty,1/4,1/2,3/4,Full) NPT = Mounting method 1/8" National Pipe Thread, this is the only option. Note: 1S is for computer based displays. |
