Contact springs are of special alloys for long life. Insulation is high dielectric strength phenolic. Tinned terminal lugs for easy soldering. Short frame. Mounts by 3/8-32 threaded bushing and nut. Open circuit until plug inserted.
Fantastic service. Ordered the gear and it arrived at my address in Australia within days. Better service than I get from Australian businesses.
Bill
21.01.2019
Ordered two. Got two of the right jack, but only nut and washer for one. Had to call and get rest mailed.
Fred
06.01.2019
The switch arrived promptly. I have yet to install it but am sure it will be fine.
Robert S
24.07.2018
Switchcraft is known for making good products and the S12B Microphone Jack P/N 11-05995 is no exception. I recently acquired an old aircraft microphone and thought it would be interesting to interface it to a computer for simulations by making a phantom power adapter. As the microphone uses the aviation standard .206/5.23mm plug, I needed a jack to connect it with. This jack is the perfect size for the aircraft microphone connector.
Dan M
15.06.2018
I replaced my intermittent microphone jack with this one, easy solder installation, works great. Inexpensive repair!
James P
09.06.2017
I needed to use this to make a non standard headset work. Everything seems to be well made and connections were easy to solder in the field.
Bernard G
04.05.2017
Isolating/insulating washers are not included.
Dave
15.12.2019
Order arrived ahead of promised date, was complete and correct.
Raymond R
21.11.2019
Excellent product. These panel jacks have a slightly smaller diameter, and provide about twice the â??retainingâ? power compared to similar products.
Stephen
01.10.2019
Its a good quality jack
Stephen
01.10.2019
Not much to say but Good quality
Rob H
23.03.2020
Excellent quality. Iâ??ve bought over 150 of these for projects and theyâ??ve always been well made and delivered quickly.
Greg
22.07.2020
Worked perfectly
Cory
24.08.2020
Gets the job done, but does not include insulating washers. The first time I bought them, they did. Subsequent sets have not.
Phillip T
03.11.2020
Quick service, high quality.
Graham S
02.11.2020
Good quality at a fair price.. I would buy again and recommend to my friends
Brian E
08.12.2020
I have installed this in the panel, but have not wired them in yet They look good
Ответ:The Headset Panel Jacks do come with a metal washers and nuts but the insulating washer is purchased separately. Part# 04-00975 - Insulated Flat Washer Part# 04-00976 - Insulated Shoulder Washer
Ответ:Yes, if your Lightspeed headset has two plugs on the end of it and uses batteries to operate, then it is a Dual GA style headset. In that case, you will need one of part # 11-04936, which is the headphone side, and one of part # 11-05995, which is the mic side.