Ответ:The EDM 830 is 3.1W x 4.2H x 3.0D (does not include connector and wire) and weighs .95lbs.

Ответ:Yes, this is for both sizes of the 700 or the 800 EDM gauges.

Ответ:The EDM 730 and 830 are secondary engine monitors so you will need to keep your primary engine gauges and probes. The EDM 930 is a primary engine monitor replacement.

Ответ:No, the upgrade is only for the new display so the options you currently have (4 or 6 cyl) will be displayed. You can add options at any time such as oil temp or oil pressure if you currently do not have those options installed.

Ответ:The depth of the EDM 730 is 3 inches. The depth of the EDM 700 is 8 inches.

Ответ:No, because you will keep the current probes you have installed the upgrade to part number 10-03864 is the same price for 4 and 6 cylinder models.

Ответ:Yes, contact sales for a quote.

Ответ:The 730 is a direct replacement for the 730 as long as you have a JPI harness and probes. The same applies to the 830, however you will have to order and install the extra options that are available with the 830.

Ответ:If he is upgrading from a 700 to a 730, all the functions he currently has will function with the 730 as plug and play.

Ответ:An 8130-3 form can be purchased for an additional cost. Please request it at checkout. The STC is available for download directly from the JPI website.

Ответ:The Guardian CO monitors are designed to interface with your audio panel or a flight system MFD. We have no compatibility information on interfaces with the EDM 730.

Ответ:The JPI EDM 730 is the basic EGT and CHT where the EDM 830 is EGT, CHT, Oil pressure and temp, MAP, OAT, RPM and %HP.

Ответ:Per JPI, you will need the option without fuel flow transducer since you have all the probes already. The 730 will detect the correct inputs from your 700 sensors and transducer.

Ответ:The JPI 700 can be upgraded to 730 and the 800to the 830. The 700/730 is a basic EGT/CHT system with no option where the 800/830 is a fully loaded engine system. You cannot upgrade the 700 to the 830 as you are missing all the optional engine add-ons to make it an 830. Your only option is to update the 730 and buy all the addition JPI engine add-ons

Ответ:The EDM 730 has both numbers and graphs for their measurements. if you view the image you will see different screenshots for the display.

Ответ:The JPI EDM 730 is 3.1"W x 4.2"H x 3.0"D without connectors and wire. Also note that this gauge (3-1/8? mounting hole) can be mounted up, down, right and left. For more information please see our videos tab for the JPI 730.

Ответ:You must return your core within 30 days.

Ответ:Per the manufacturer you must upgrade to the 730 and add any additional options that you require in your project.