Vinyl Ester Resin Kits

от 13419 11183 руб.

до 19921 16601 руб.

Select Size:

При добавлении в корзину к цене товара добавится таможенное оформление опасного груза. Окончательную стоимость Вы увидите при оформлении заказа.

Оплата и доставка

Overview

**Note: 3 month shelf life**

Derakane Momentum 411-350 epoxy vinyl ester resin is based on bisphenol-A epoxy resin and provides resistance to a wide range of acids, alkalis, bleaches, and organic compounds for use in many chemical processing industry applications. Derakane Momentum resins are a new generation of resins that can be used to improve fabrication efficiency and product quality. Their lighter color makes defects easier to see and correct while the resin is still workable. The resin's improved reactivity properties often permit and increase in the lay-up thickness per session. The longer stability provides additional flexibility to fabricators in storage and handling. Resin: Color may vary by manufacturer.

Warning: MEKP Catalyst is very dangerous to the eyes. Always wear full goggle protection and have running water at hand when working with MEKP.

Specifications

Catalyst Large Quantity Chart

Catalyst Concentration	Resin Quantity
Quart	Gallon	5 Gallon
1/2%	1/16 oz.	2/3 oz.	1-1/3 oz.
3/4%	1/4 oz.	1 oz.	5 oz.
1%	1/3 oz.	1-1/3 oz.	6-2/3 oz.
1 1/2%	1/2 oz.	2 oz.	10 oz.

Catalyst Small Quantity Chart (20 -30 minute pot life at 2% mix ratio)

Catalyst Concentration	Resin Quantity 30 drops = 1 cc
2 oz.	4 oz.	8 oz.	12 oz.	16oz.
1/2%	9 drops	18 drops	36 drops.	1.8 cc.	2.5 cc.
3/4%	14 drops	27 drops	2 cc.	3 cc.	4 cc.
1%	18 drops	36 drops	2.5 cc.	3.75 cc.	5 cc.
1 1/2%	27 drops	2 cc.	4 cc.	6 cc.	8 cc.
2%	36 drops	2.5 cc.	5 cc.	7.5 cc.	10 cc.

Property	DERAKANE 411-350 PA
Tensile Strength, psi	11-12,000
Tensile Modulus, units 105 psi	4.9
Elongation, % (DERAKANE 411-350)	5-6
Flexural Strength, psi	16-18,000
Flexural Modulus, units 105 psi	4.5
Compressive Strength, psi	16-17,000
Compressive Modulus, units 105 psi	3.5
Compressive Deformation at Yield, %	6.5-7.8
Specific Gravity	1.12
Heat Distortion Temp., F	210-220
Barcol Hardness	35

Documents

Vinyl Resin TDS (PDF)

Customers Also Viewed
Frequently Purchased With
Related Items

VINYL ESTER RESIN

$42.50

#7781 FIBERGLASS CLOTH

$8.95

POLYESTER RESINS - TYPE A

$31.50

MEKP CATALYLST

$2.85

RUTAN FIBERGLASS CLOTHS

$9.65

BIDIRECTIONAL WOVEN CARBON FIBER

$28.65

3M GLASS BUBBLES

$10.75

DIVINYCELL FOAM PVC

$20.80

WEST SYSTEM EPOXY KITS

$63.00

MILLED GLASS FIBERS - BAG

$4.95

LAST-A-FOAM

$69.90

EPOXY MIXING CUP 12 OZ (50 PACK)

$8.90

MGS EPOXY RESINS

$156.75

POLYURETHANE FOAM

$12.50

HTR-212 LAMINATING RESIN

$61.85

#1080-50 E-GLASS FIBERGLASS CLOTH

$6.80

MIXING STICKS - BOX OF 500

$12.50

#120-38 STANDARD E-GLASS FIBERGLASS CLOTH 38

$9.55

CAB-O-SIL

$14.50

WEST SYSTEM 300 MINI PUMP KIT

$19.25

FIBERGLASS CLOTH 7781-50

$8.95

MILLED GLASS FIBERS 1 LB

$4.95

BID FIBERGLASS 38" RA7725/38W F16

$7.90

STD FIBERGLASS CLOTH #7533 60"

$10.85

URETHANE FOAM 1/2" X 24" X 48"

$12.50

BRUSH 1"

$0.50

BRUSH 2"

$0.60

BOLT UNDRILLED AN3-52A

$10.50

CAB-O-SIL 1 GALLON BAG

$14.50

BOLT UNDRILLED AN3-4A

$0.13

FLOCKED COTTON FIBER 1 LB.

$4.75

WEST SYSTEM 300 RATIO PUMPS

$19.25

VINYL ESTER RESIN 411-350PA QT

$42.50

VINYL ESTER RESIN 411-350PA 1G

$82.75

Reviews

Submit a Review

The Derakane Vinyl Ester resin works great on the layups for my Glasair. This is an improved version of the same resin originally supplied with the Glasair kits. The Derakane 411 is already promoted, so just need to add the MEKP catalyst. I use two drops of MEKP per 6 grams of resin.

Dave H

March 18, 2020

Durakane vinyl ester resin is still one of he most user friendly and versatile resins for aircraft construction. Good temperature and fuel resistance, and its low viscosity penetrates well during lamination. Used extensively in the Glasair and other aircraft lines, it can be mixed with a number of additives for use in different areas of construction. Advertised shelf life is 3 months, but in a cool climate controlled shop, six months is possible. AS&S deliveries fresh vinyl ester resin well packaged, with quick delivery. I transfer it to a gallon glass jug, and use a screw in pump that delivers about 25 mg at a pump. Works great.

Charles S

July 1, 2018

Vinyl ester epoxy modified resin is the best of both worlds for laminating tanks for gasoline, acid...virtually any liquid. you work it like polyester, a resin rich layup. Only use epoxy for wood. Aircraft Spruce has an excellent price (but dont tell them that)

Carey C

January 10, 2017

Charles S 01.07.2018	Durakane vinyl ester resin is still one of he most user friendly and versatile resins for aircraft construction. Good temperature and fuel resistance, and its low viscosity penetrates well during lamination. Used extensively in the Glasair and other aircraft lines, it can be mixed with a number of additives for use in different areas of construction. Advertised shelf life is 3 months, but in a cool climate controlled shop, six months is possible. AS&S deliveries fresh vinyl ester resin well packaged, with quick delivery. I transfer it to a gallon glass jug, and use a screw in pump that delivers about 25 mg at a pump. Works great.
Carey C 10.01.2017	Vinyl ester epoxy modified resin is the best of both worlds for laminating tanks for gasoline, acid...virtually any liquid. you work it like polyester, a resin rich layup. Only use epoxy for wood. Aircraft Spruce has an excellent price (but dont tell them that)
Dave H 18.03.2020	The Derakane Vinyl Ester resin works great on the layups for my Glasair. This is an improved version of the same resin originally supplied with the Glasair kits. The Derakane 411 is already promoted, so just need to add the MEKP catalyst. I use two drops of MEKP per 6 grams of resin.