Jeffco Epoxy Laminating System

от 11832 9860 руб.

до 1476248 1230206 руб.

Наличие: Проверяйте наличие по каждому товару

Типы

Артикул
Название
Цена за ед.
Кол-во
Цена
01-07920 JEFFCO 3102 STANDARD HARDENER 40 LB 162525 135438 руб. 0.000.00 руб.
01-07924 RHINO 1 GAL KIT MEDIUM 24899 20750 руб. 0.000.00 руб.
01-07916 RHINO 1 GAL KIT FAST 27292 22743 руб. 0.000.00 руб.
01-07917 RHINO 1307 LV RESIN 5 GAL 40# 99791 83159 руб. 0.000.00 руб.
01-01059 RHINO 1307 LV RESIN 55 GAL 1476248 1230206 руб. 0.000.00 руб.
01-07914 RHINO 1307 LV RESIN GAL 8 LB 32492 27077 руб. 0.000.00 руб.
01-07915 RHINO 3102 FAST HARDENER 2LB 11832 9860 руб. 0.000.00 руб.
01-07918 RHINO 3102 FAST HARDENER 8 LB 36393 30328 руб. 0.000.00 руб.
01-07923 RHINO 3176 MED HARDENER 2 LB 12027 10023 руб. 0.000.00 руб.
01-07922 RHINO 3176 MED HARDENER 8 LB 35353 29461 руб. 0.000.00 руб.
01-07921 RHINO 3176 MED HARDENER 40 LB. 158625 132187 руб. 0.000.00 руб.
01-07919 RHINO LV 1307 5 GAL KIT FAST 130541 108784 руб. 0.000.00 руб.
01-07925 RHINO LV 1307 5 GAL KIT MED 129487 107906 руб. 0.000.00 руб.

Итого: 0.000.00 руб.

Overview

1307 Low Viscosity Resin / H-3102 Fast Epoxy Hardener - 100% solids two component epoxy laminating system with excellent wet out, low viscosity and high strength. Very low odor and toxicity. Easy to use, Mix Ratio: 4:1 by volume; 100:22 by weight. Gel Time: 12-15 minutes @ 77°F (150 grams). Fast curing products for a variety of use applications. Used for fast curing, penetrating wood coatings, adhesives and sealers, fiberglass laminating and microsphere filled fairing compounds. Excellent cold temperature cures down to 40 degrees F. No solvents or VOCs. Non-hazardous, non-corrosive hardener.

H-3176 30-minute Medium R/T Epoxy Hardener- Safety Press Molding Epoxy Hardner. Good low temperature cure. Fast wetting of fiberglass reinforcements. Easy to use 4:1 mix ratio by volume; 100:22 by weight. Gel time: 25-30 minutes @ 77°F (150 grams). High HDT at room temp, increasing with post cure. Low toxicity, very low odor. Non-hazmat.