Bendixking Kt 74 And Kgx 150r Ads-b In / Out Package With Antenna

Артикул: 11-15380

1818720 1515600 руб.

Наличие: – Есть в наличии у нашего поставщика. Доставка на наш склад в течение 5...6 недель после оплаты Вами заказа.

Overview

This complete ADS-B In/Out package for certified aircraft includes the KGX 150R ADS-B UAT Receiver, KT-74 ADS-B Out Mode S Transponder, KGX WiFi module with installation kit, as well as both GPS and Mode L antennas.

KT-74 Mode S Transponder:
If a new transponder is on your "to-get" list, you might want to choose one that's both relevant now and in the future. The KT 74 transponder from Bendix/King is the easiest upgrade to the popular KT 76A/C and KT 78A models, with a 'plug and go' capacity. And it's ADS-B compliant, therefore meeting all 2020 requirements. It is low-cost, easy to install and fits into your existing panel. Suiting your needs now and in the future.

KT 74 ADVANTAGE
  • Retrofit - 'plug and play' installation
  • Low-cost solution that will offset future costs
  • Low power consumption
  • ETSO and TSO approved Mode S
  • Accurate readings with updates every few seconds
  • More efficient routing and better situational awareness
  • Meets ADS-B 2020 requirements*
FACTS ON THE FLY:
  • ADS-B will result in better communication between pilots and air traffic controllers for more efficient routing and resource management
  • Anyone who flies a Mode C or Mode S transponder will need to be equipped with ADS-B "Out" by 2020
  • Radar controls can be 12 seconds out of date
  • ADS-B "Out" means you're broadcasting your position information to ground stations and other aircrafts
KGX-150R ADS-B Receiver
The KGX 150R ADS-B Receiver with included WiFi Module is best optimized for those who fly above and below 18,000 feet or want to replace their existing transponder with the KT 74 1090 extended squitter transponder. Also includes an integrated ADS-B OUT Compliant WAAS GPS. The KGX 15OR provides the ADS-B traffic and weather services to non-certified wireless tablet or certified compatible panel display. No external controller is needed. ADS-B UAT Transceiver (IN & OUT) and Receiver (IN) configurations with and without an Integrated WAAS GPS are available.

The Peregrine Switch Kit is required for installation per STC Part Number: 10-05913.