Nutserts

от 73 61 руб.

до 1158 965 руб.

Наличие: Проверяйте наличие по каждому товару

Типы

Артикул
Название
Цена за ед.
Кол-во
Цена
ATS2-440 NUTSERT 4-40 ATS2-440 76 63 руб. 0.000.00 руб.
ATS2-1024 NUTSERT 10-24 ATS2-1024 92 76 руб. 0.000.00 руб.
ATS2-813 NUTSERT 1/2-13 ATS2-813 1158 965 руб. 0.000.00 руб.
ATS2-420 NUTSERT 1/4-20 ATS2-420 157 131 руб. 0.000.00 руб.
ATS2-428 NUTSERT 1/4-28 ATS2-428 154 128 руб. 0.000.00 руб.
ATS2-616 NUTSERT 3/8-16 ATS2-616 440 367 руб. 0.000.00 руб.
ATS2-518 NUTSERT 5/16-18 ATS2-518 222 185 руб. 0.000.00 руб.
ATS2-524 NUTSERT 5/16-24 ATS2-524 313 261 руб. 0.000.00 руб.
ATS2-632 NUTSERT 6-32 ATS2-632 89 74 руб. 0.000.00 руб.
ATS2-832 NUTSERT 8-32 ATS2-832 73 61 руб. 0.000.00 руб.
ATS2-1032 NUTSERT 10-32 ATS2-1032 73 61 руб. 0.000.00 руб.

Итого: 0.000.00 руб.

Overview

Installation hole size for the A-T Series Insert is determined by the parent material's thickness and density. The thicker the material the larger the hole required to allow full 360° installation swaging. The application should be tested before hole size is specified.

The A-T Series Insert is unique in that it can be installed into most any material above .030/,76 mm in thickness. As the A-T Series is installed, the threaded portion is completely swaged 360° into the sleeve portion and the hole. This permits the A-T Series to be used with Grade 8/metric 12.9 mating screws. The A-T Series Insert is installed using lightweight, hand held pneumatic tools that can be located at any position in your product's assembly sequence. The A-T Series Insert can be installed either prior to or after finish.

360°SWAGING
HOW IT WORKS FOR YOU
As the A-T Series Insert is installed, the threaded nut portion is drawn into the upper sleeve portion.As this occurs, a 360° swaging action takes place anchoring the A-T Series in the parent material.