Hook -n- Pull Tie Downs

от 6306 5255 руб.

до 8062 6718 руб.

Наличие: Проверяйте наличие по каждому товару

Типы

Артикул
Название
Цена за ед.
Кол-во
Цена
13-04962 HOOK N PULL HI WING TIEDOWN HD 8062 6718 руб. 0.000.00 руб.
13-00448 HOOK N PULL HI WING TIEDOWN LT 6762 5635 руб. 0.000.00 руб.
13-00449 HOOK N PULL LO WING TIEDOWN LT 6306 5255 руб. 0.000.00 руб.
13-04961 HOOK N PULL LOW WNG TIEDOWN HD 7672 6393 руб. 0.000.00 руб.

Итого: 0.000.00 руб.

Overview

Hook-N-Pull? Tie Downs feature closed end "S" hooks made from high quality steel with heavy plating, and tie down bards are made from high grade aluminum, hardened for strength and ball burnished and anodized. Furnished with either 3/8" or 1/2" diameter nylon rope.

3/8" dia. are designed for Light aircraft, Home Builts, and Take-a-long.
1/2" dia. are designed for Heavy Singles and Light to Medium Twins.Tie-down - Measured* lengths:

Low wing & Tail Tie-downs max. reach: 54 inches. (3 ft. Measured)
High wing Tie-downs max. reach of 108 inches. (7 ft. Measured)

Click here to view Secure & Release Illustration

All of the Tie-Downs are made with the highest quality 3 strand twisted nylon rope available. Nylon shows excellent resistance to abrasion, rot, mildew, petroleum products, and most chemicals. Nylon also has a slight elastic characteristic which resists shock loads that could otherwise damage aircraft.
    *MEASURED
    Measure to the closest foot, the distance from the ground anchor to the planes point of attachment. Use this foot mark to determine the tie-down length. HINT: Be sure to measure both sides, as the plane may be closer to one anchor then the other.

    SHORTENING A TIE-DOWN
    Hook-N-Pull? Tie-downs can be shortened by pulling the tie-down bar away from the half knot and tying a third half knot close to the bars new position.