Grommet Edging - M22529/2 Series

от 1701 1417 руб.

до 48838 40698 руб.

Наличие: Проверяйте наличие по каждому товару

Оплата и доставка

Типы

Артикул	Название	Цена за ед.
05-00673	GROMMET EDGING M22529/2-1R	1726 1438 руб.
05-00674	GROMMET EDGING M22529/2-1C-85 PACK OF 10	18307 15256 руб.
05-00675	GROMMET EDGING M22529/2-2R	1726 1438 руб.
05-00676	GROMMET EDGING M22529/2-2C-85 PACK OF 10	17810 14842 руб.
05-00677	GROMMET EDGING M22529/2-3R	1726 1438 руб.
05-00678	GROMMET EDGING M22529/2-3C-85 PACK OF 10	17810 14842 руб.
05-00679	GROMMET EDGING M22529/2-4R	1862 1552 руб.
05-00680	GROMMET EDGING M22529/2-4C-85 PACK OF 10	17066 14221 руб.
05-00681	GROMMET EDGING M22529/2-5R	1701 1417 руб.
05-00682	GROMMET EDGING M22529/2-5C-85 PACK OF 10	16817 14015 руб.
05-00683	GROMMET EDGING M22529/2-6R	1862 1552 руб.
05-00684	GROMMET EDGING M22529/2-6C-85 PACK OF 10	16817 14015 руб.
05-00685	GROMMET EDGING M22529/2-7R	2110 1759 руб.
05-00687	GROMMET EDGING M22529/2-7C-10PK	17810 14842 руб.
05-00688	GROMMET EDGING M22529/2-8R	2172 1810 руб.
05-00690	GROMMET EDGING M22529/2-8C-85 PACK OF 10	21037 17531 руб.
05-00667-25	GROMMET EDGING 25FT REEL M22529/2-3R-25	37916 31597 руб.
05-00673-25	GROMMET EDGING M22529/2-1R-25	43402 36168 руб.
05-00679-25	GROMMET EDGING M22529/2-4R-25	41143 34286 руб.
05-00681-25	GROMMET EDGING M22529/2-5R-25	42881 35734 руб.
05-00685-25	GROMMET EDGING M22529/2-7R	48838 40698 руб.
05-00688-25	GROMMET EDGING M22529/2-8R-25	47597 39664 руб.

Итого: 00 руб.

Overview

Mil Spec qualified Spring-Fast is the fastest, safest, most reliable way to protect wires, cables, and tubing from abrasion. It locks on with finger pressure in seconds, eliminating solvents, adhesives, ancillary materials and volatile organic compound (VOCs). Installs continuously and is very flexible for use on straight edges and sharp inside and outside corners.

Spring-FastÂ® Composite Grommet Edging covers sharp edges of panels that come in contact with wite and cables and mechanically lock on indefinitely with finger pressure in only seconds per foot. They provide a significant time reduction in assemblies. A long-term reliability solution that replaces nylon caterpillar plastic grommets and associated solvents, adhesives, and ancillary materials to protect critical equipment from failure due to wire chaffing.

Spring-FastÂ® Grommet Edging is approved by the FAA and U.S. Department of Defense per NASM 22529/a and NASM 22529/2 for all aircraft applications. Meets FAR 25.853 for flammability and MIL 1344 for shock and vibration. Spring-FastÂ® is available for 8 different sheet thickness ranges from 0.025 to 0.260 and can be purchased in either 10 piece packs of 12.75" long pieces, or 25 or 100-foot reels. Use Spring-FastÂ® BAP and SL series for flanged lightning hole and three-axis contours. The BAP Series Flexi-Grommet is perfect for roll formed edges and small lightening holes. Where wires are routed in the same plain as the sheet metal, the Spring-FastÂ® SL Series provides a trim characteristic for all edges with or without cabling nearby.

Spring-FastÂ® is used in a wide variety of aviation and aerospace applications:
? Lightening Holes
? Wing Sections
? Seating
? Intercostals
? Fuselage
? Avionics
? Bulkheads
? Air Traffic Control
? Racks ? Tail Sections
? Tactical Satellite Emulators
? Ferrules
? Navigation Systems
? Electrical Power Centers
? Ground Control
? EAU (Electrical Avionic Units)
? PSU (Personal Safety Units)
? APU (Auxiliary Power Units)
? IFE (In-Flight Entertainment)

Добавить отзыв

Rj 06.08.2019	Ive used the M22529/2 for the better part of nine years - finally someone got it right replacing the older glued nylon MS21266. No more pli-o-bond, no more acetone or MEK, clean and simple to use. Ive static loaded it to 20G - very impressive and use a smear of RTV if the seam gap is greater then 1/32
George A 22.03.2019	Very high quality item with super fast shipping.
Bruce B 25.10.2018	For what I wanted to use the flex for, it was a bit too high quality. It is a bit thicker than the white nylon flex that is more common and hence if the metal hole is not sufficiently large, then there is not sufficient space for all. It might be that ACS consider also stocking the lighter nylon flex.
H.c. P 20.09.2018	I love it when a product works exactly as advertised. It is easy to cut into the lengths you need with a simple pair of side cutters. I used my grommet edging to line the lightening holes in my wings to prevent chafing of wiring harnesses. It installs very easily by just pushing it down onto the edge, and is secure enough that it will not move again, yet not so secure that you cant move or remove it if you have to. Its a bit pricey, but it does exactly what I wanted and is one of the few things about my project that was easy to install.
Robert J 28.07.2017	I used this to prevent chafing of wires in landing gear wells where wires run close to ribs and bulkheads. Works perfect and I put a little adhesive to make sure it stays put.
Kristi P 25.05.2017	THe product was great. The customer service was even greater. John Cash is a great person to deal with at Aircraft Spruce. Thank you very much. Will definately do business with you again.
Don P 22.05.2017	Needed to protect an aluminum fuel line passing through an oblong hole. This will work perfectly!
Don M 20.02.2017	I used this around a lightning hole in the seat ribs where wires were close. It was very easy to install and appears to create a nice smooth edge that will not chaff wires.
Don F 29.09.2019	Used the edging during ADS-B OUT upgrade. It was very easy to use and installs without any difficulties. I am now reassured that my planes wiring used in this upgrade is protected from being cut or scraped as it goes through the planes metal panels. I will use this product for any further maintenance work or upgrades.
Byers C 09.10.2020	Excellent product. Works as advertised. Will purchase additional material in appropriate sizes.
Tom M 16.11.2020	Great product! Perfect for lightening holes to prevent chaffing of hoses and wiring that passes through.
Alman G 02.12.2020	I installed this on my wood chippers sheet metal engine housing. To line the through hole to prevent chaffing on the air filter housing tube. Took less than 10 min without disassembly. It rides the edge with minimal clearance and stays in place nicely.