Camloc 2600 Wing Studs

от 170 141 руб.

до 9583 7986 руб.

Наличие: Проверяйте наличие по каждому товару

Типы

Артикул
Название
Цена за ед.
Кол-во
Цена
2600-2W 2600-2W CAMLOC CAD WING STUD 9583 7986 руб. 0.000.00 руб.
2600-3W 2600-3W CAMLOC CAD WING STUD 5175 4313 руб. 0.000.00 руб.
2600-4W 2600-4W CAMLOC CAD WING STUD 5110 4259 руб. 0.000.00 руб.
2600-5SW 2600-5SW SS CAMLOC WING STUD 6111 5093 руб. 0.000.00 руб.
2600-5W 2600-5W CAMLOC CAD WING STUD 5149 4291 руб. 0.000.00 руб.
2600-6W 2600-6W CAMLOC CAD WING STUD 4551 3793 руб. 0.000.00 руб.
2600-7W 2600-7W CAMLOC WING STUD 4317 3598 руб. 0.000.00 руб.
2600-8SW 2600-8SW CAMLOC STUD (WING) 3628 3023 руб. 0.000.00 руб.
2600-8W 2600-8W CAMLOC CAD WING STUD 6970 5808 руб. 0.000.00 руб.
2600-10W 2600-10W CAMLOC CAD WING STUD 5877 4898 руб. 0.000.00 руб.
2600-11W 2600-11W CAMLOC CAD WING STUD 5162 4302 руб. 0.000.00 руб.
2600-12W 2600-12W CAMLOC CAD WING STUD 9050 7542 руб. 0.000.00 руб.
2600-9W 1126010-9 CAMLOC CAD WING STUD 6111 5093 руб. 0.000.00 руб.
212-12N CAMLOC 2600/2700 RECPT 212-12N 950 791 руб. 0.000.00 руб.
212-12ND Розетка Дзуса CAMLOC 212-12ND 1028 856 руб. 0.000.00 руб.
2600-LW Стопорное кольцо CAMLOC 2700/2600-LW 170 141 руб. 0.000.00 руб.
2600-SW-2 Стопорное кольцо CAMLOC 2700/2600-SW-2 638 531 руб. 0.000.00 руб.

Итого: 0.000.00 руб.

Overview

2600/2700 STUD LENGTH SELECTION
Total material thickness ?G? consists of the thickness of all materials to be fastened. This must include the thickness of the material ?P? to which the stud assembly is attached, the material ?F? to which the receptacle is attached plus gaskets (if used) and allowance for paint or other protective finishes. If the total thickness is near the upper limit of the stud grip range, the next longer stud should be used. This will still maintain positive locking of the fastener under vibration.

P (panel thickness)..................... .062
F (frame thickness................... + .062
GRIP (total thickness).............. = .124


STUD SELECTION TABLE
Using 212-12 Receptacle
Total Grip Thickness
Use 2600
Use 2700
.021-.059
2600-1
2700-1
.060-.089
2600-2
2700-2
.090-.119
2600-3
2700-3
.120-.149
2600-4
2700-4
.150-.179
2600-5
2700-5
.180-.209
2600-6
2700-6
.210-.239
2600-7
2700-7
.240-.269
2600-8
2700-8
.270-.299
2600-9
2700-9
.300-.329
2600-10
2700-10
.330-359
2600-11
2700-11
.360-389
2600-12
2700-12
.390-.419
2600-13
2700-13
.420-.449
2600-14
2700-14
*4002-G grommet requires .090" minimum grip.


2600, 2700 SERIES RETAINING WASHER
Retaining washers are required for studs of -5 length or greater. Use split washer 2600- SW2 where it is desirable to have the stud fall away for minimum internal projection. Use internal tooth washer 2600-LW where it is desirable to retain the stud assembly rigidly.
PN 2600-SW-2
$1.01
PN 2600-LW
$0.29

2600, 2700 SERIES RETAINING WASHER
Rivet Holes
2600, 2700 Series Part No.
Price
Plain
212-12N
$2.75
Countersunk
212-12ND
$3.95