Camloc 2700 Studs

от 125 103 руб.

до 4375 3586 руб.

Наличие: Проверяйте наличие по каждому товару

Типы

Артикул	Название	Цена за ед.
06-02324	27S3-2S CAMLOC STAINLESS STEEL STUD	3634 2979 руб.
2700-1	CAMLOC FASTENERS 2700-1 STUDS	2596 2128 руб.
2700-10	CAMLOC FASTENER 2700-10 STUDS	1827 1498 руб.
2700-11	CAMLOC FASTENERS 2700-11 STUDS	1414 1159 руб.
2700-11S	2700-11S CAMLOC STUD SS	3221 2640 руб.
2700-12S	2700-12S SS CAMLOC STUD	2673 2191 руб.
2700-1S	CAMLOC FASTENER 2700-1S	1481 1214 руб.
2700-2	CAMLOC FASTENERS 2700-2 STUDS	2058 1687 руб.
2700-2S	CAMLOC FASTENER 2700-2S	1029 844 руб.
2700-3	CAMLOC FASTENERS 2700-3 STUDS	2019 1655 руб.
2700-3S	CAMLOC FASTENER 2700-3S	2644 2167 руб.
2700-4	CAMLOC FASTENERS 2700-4 STUDS	1337 1096 руб.
2700-4S	CAMLOC FASTENER 2700-4S	1327 1088 руб.
2700-5	CAMLOC FASTENERS 2700-5 STUDS	1683 1379 руб.
2700-5S	Быстросъемный крепеж Camloc 2700-5S	1529 1253 руб.
2700-6	Дзус 2700-6 CAMLOC	3240 2656 руб.
2700-6S	CAMLOC FASTENER 2700-6S	3375 2766 руб.
2700-7	CAMLOC FASTENERS 2700-7 STUDS	1856 1521 руб.
2700-7S	CAMLOC FASTENER 2700-7S	1250 1025 руб.
2700-8	CAMLOC FASTENERS 2700-8 STUDS	1452 1190 руб.
2700-8S	CAMLOC FASTENER 2700-8S	1443 1182 руб.
2700-9	CAMLOC FASTENERS 2700-9 STUDS	2106 1726 руб.
27S3-1	CAMLOC FASTENER 27S3-1	2452 2010 руб.
27S3-10	CAMLOC FASTENER 27S3-10	2096 1718 руб.
27S3-12	27S3-12 CAD PLATED CAMLOC	2212 1813 руб.
27S3-13	27S3-13 CAD PLATED CAMLOC	3452 2829 руб.
27S3-14	CAMLOC FASTENER 27S3-14	2981 2443 руб.
27S3-2	CAMLOC FASTENER 27S3-2	1279 1049 руб.
27S3-3	CAMLOC FASTENER 27S3-3	1443 1182 руб.
27S3-4	CAMLOC FASTENER 27S3-4	1635 1340 руб.
27S3-5	CAMLOC FASTENER 27S3-5	760 623 руб.
27S3-6	Крепеж Camloc 27S3-6	4375 3586 руб.
27S3-7	CAMLOC FASTENER 27S3-7	3558 2916 руб.
27S3-8	CAMLOC FASTENER 27S3-8	2625 2152 руб.
27S3-9	CAMLOC FASTENER 27S3-9	1894 1553 руб.

Итого: 00 руб.

Overview

2700 STUD LENGTH SELECTION
Total material thickness ?G? consists of the thickness of all materials to be fastened. This must include the thickness of the material ?P? to which the stud assembly is attached, the material ?F? to which the receptacle is attached plus gaskets (if used) and allowance for paint or other protective finishes. If the total thickness is near the upper limit of the stud grip range, the next longer stud should be used. This will still maintain positive locking of the fastener under vibration.

P (panel thickness)..................... .062
F (frame thickness................... + .062
GRIP (total thickness).............. = .124

STUD SELECTION TABLE Using 212-12 Receptacle
Total Grip Thickness	Use 2700
.020-.059	2700-1
.060-.089	2700-2
.090-.119	2700-3
.120-.149	2700-4
.150-.179	2700-5
.180-.209	2700-6
.210-.239	2700-7
.240-.269	2700-8
.270-.299	2700-9
.300-.329	2700-10
.330-359	2700-11
.360-389	2700-12
.390-.419	2700-13
.420-.449	2700-14


2600, 2700 SERIES RETAINING WASHER Retaining washers are required for studs of -5 length or greater. Use split washer 2600- SW2 where it is desirable to have the stud fall away for minimum internal projection. Use internal tooth washer 2600-LW where it is desirable to retain the stud assembly rigidly.

PN 2600-SW-2 $1.01	PN 2600-LW $0.29

2600, 2700 SERIES RECEPTACLES

Rivet Holes	2600, 2700 Series Part No.	Price
Plain	212-12N	$2.75
Countersunk	212-12ND	$3.95

Добавить отзыв

Jamie A 09.09.2019	Fit my C182p cowl perfectly.
Ken 03.03.2019	Worked perfect. These were used on a Mooney 231 cowling. The -4 are used on all attachments except rear mist which are -7.
John 11.03.2018
Don C 06.02.2020	Great service !
Nicholas M 05.08.2020	Great fasteners. Do the job with easy release.
Steve U 03.10.2020	Good news/ bad news: The good news is that the 27S3-2 faster fits my 182 cowl well. The bad news is that the catalog info was poor and I had to order 4 different sizes in order to understand the sizing system. Also ordered both kinds of lock washers for the same reason.
Nick 27.10.2020	Camloc worked like a charm for replacing the one I misplaced.
Albert H 20.10.2020	Be aware the measurement from the top of the faster head to the horizontal part that does the fastening is somewhat ambiguous. The diagram could be more clear as to this distance on each part. I ended up ordering six different pieces before I got the correct Camloc since I was guessing. The Camloc functions perfectly now that I have the correct size.
Tom W 02.11.2020	Ordered wrong ones,returned them and ordered correct ones. No problems ,happy customer.
Steve U 09.12.2020	Very difficult to determine correct size from Spruce catalog. I ordered several examples and went by trial and error. The size on the old part is frequently unreadable.
Alan L 07.12.2020	I ordered the wrong size. The ones I got were too small so I sent them back with one of mine here so you could personally match it. I mailed it last Monday Alan
Arthur P 03.12.2020	On these quarter-turn fasteners 2700-x, the last digit, the x is embossed into the top of the fastener, the top of the screw-head. I, like many others no doubt, lost one of my fasteners, and wasted time, $, and effort trying to determine the correct size. Please make mention of this fact in your description, for the benefit of others!