Avtek Bonding And ground Kit

Артикул: 11-07359

64997 54165 руб.

Наличие: – Есть в наличии у нашего поставщика. Доставка на наш склад в течение 5...6 недель после оплаты Вами заказа.

Overview

  • Do your Panel Instruments Bounce and become erratic?
  • Does your Starter turn your Engine SLOWLY and
    you have a new fully charged battery?
  • Do you see an ugly corroded Battery Posts soon after you clean the Post?
These are symptoms of BAD Ground/Bonds

Your aircraft operates on D/c Direct/Current...Aluminum is a perfect metal for "Anode/Cathode" environment. Corrosion loves The Cathode side which is the Airframe Negative-Side of the Battery Current Flow.

The Negative side where corrosion develops creates "Resistance" this resistor on the ground can be anywhere from 1 Ohm to Infinity...This resistor creates a "Voltage-Drop" which shows up as Intermittent Radios and other Panel Gages.

When the Resistive Corrosion is developed at the Starter...a Voltage Drop is created causing insufficient voltage/amperage... ...The result is slow turning during starts. Mechanics miss-diagnosing the problem and a NEW Starter is purchased needlessly.

To compound the aggravating problem, it takes years for these and other symptoms to surface. Whereas when a Spark-Plug or Magneto fails those failure-symptoms shows-up immediately.

    Kit includes:
  • FAA-APPROVAL
  • Three (3) Jumper One for the panel, starter and your battery...and Aluminum Fasteners
  • DVD step by step how to Power-Point Presentation
  • Sealant