Note: Unit can only be sold for experimental aircraft.
The Stratus ESGi provides a simplified ?all-in-one box? solution for 2020 compliance with a Stratus ESG transponder, as well as a non-certified ADS-B receiver.
Stratus ESG (ADS-B OUT)
1090ES transponder
Built-in WAAS GPS
GPS Antenna Included
Stratus 3i (ADS-B IN)
Non-certified receiver made only for Stratus ESG
Backup AHRS
Integrated with ForeFlight on iPad
Requires connection to Stratus ESG
Features
1090ES (Mode S extended squitter)
Built-in WAAS GPS
Meets global mandates for ADS-B Out
Push-button operation
Easy-to-use interface
Pressure altitude monitor
Specifications
Bezel Height: 1.69 in. (43 mm)
Bezel Width: 6.38 in. (162 mm)
Depth: 10.75 in. (273 mm) front of panel to connector backshell
Weight: 3.29 lbs. (1.49 kg) including rack and connectors
Ответ:Yes, you still need an altitude encoder. These units come with all the required connector kits. The existing antenna cable should be compatible, but you will want to confirm that it is BNC male to BNC male. The Stratus 2S pairs wirelessly via Bluetooth so no other accessories are required.
Ответ:For certified aircraft installations, the unit will need to be purchased and installed by a certified avionics installer. We can only sell this unit for experimental aircraft installations at this time.
Ответ:The Stratus needs to be mounted using its own rack. The bezel dimensions are 6.38" wide, by 1.69" in height. The rack to be installed is 6.32" wide, and 1.65" tall.
Ответ:We recommend the ACK or Trans-Cal encoders for this set up. This unit will accept either a parallel or RS232 altitude encoder input. A transponder antenna will be required such as a TED (pn: 11-17995) or RAMI (pn: av-22). Coax cables will be required to interface the transponder to your gps antenna (included with esgi) and transponder antennas, and a wiring harness to connect the unit to your aircraft power.
Ответ:Coax cable is not included in the harness. That must be purchased separately. You can use our custom coax builder to request the connectors and length that you need for your installation.
Ответ:The items listed on this page are for use in experimental aircraft only. Please see Part# 11-16556 or Part# 11-16555 for certified aircraft applications.