E-z Poxy Epoxy Laminating Systems

от 17128 14273 руб.

до 249710 208092 руб.

Наличие: Проверяйте наличие по каждому товару

При добавлении в корзину к цене товара добавится таможенное оформление опасного груза. Окончательную стоимость Вы увидите при оформлении заказа.

Оплата и доставка

Типы

Артикул	Название	Цена за ед.
01-00245	EZ EPOXY EZ10-1G RESIN	40895 34079 руб.
01-00246	EZ EPOXY EZ10-5G RESIN	156379 130316 руб.
01-00247	EZ EPOXY EZ83-1/2G HARDENER	34466 28722 руб.
01-00249	EZ EPOXY EZ83-2-1/2G HARDENER	136025 113354 руб.
01-00253	EZ EPOXY EZ87-1/2G HARDENER	27243 22702 руб.
01-07850	EZ EPOXY 1-1/2 GALLON KIT	55589 46325 руб.
01-07950	EZ EPOXY 5 GALLON KIT	249710 208092 руб.
01-08050	EZ EPOXY 1-1/2 QUART KIT	17128 14273 руб.

Итого: 00 руб.

Overview

In early 1996, Composite Design Co. developed E-Z Poxy to provide a replacement epoxy system for Epolite (Safe-T-Poxy) which is no longer produced by Hexcel. The E-Z Poxy series of laminating systems utilizes one resin and your choice of three hardeners for varying pot life and viscosity requirements. The E-Z Poxy systems offer the same handling and physical properties as the discontinued Epolite systems including ease of use, long pot life, rapid cure for demold or process continuation, and superior room temperature curing properties. Excellent for use in sport aviation, marine, and industrial applications.
E-Z 83 hardener is equivalent to Safe-T-Poxy standard hardener, and E-Z 87 is equivalent to Safe-T-Poxy slow hardener. E-Z Poxy products should not be mixed with materials produced by other epoxy manufacturers.
E-Z Poxy systems provide excellent room temperature curing systems for hand layup of composite parts and tooling. The systems are designed to provide ample working time with the varied pot life options while providing a rapid finish cure. Post curing these systems will increase their physical properties as designated in the above data, however, post cure is not required.

Containers are filled by weight. Cans may be short filled.

Добавить отзыв

A. 12.08.2019	Awesome Epoxy for the Aircraft I am building. Have to know your amounts and weights.
Edward B 13.11.2018	Perfect for student projects.
Ed B 03.07.2017	Its the only product we use for students to complete their composite projects. Hardener just needs some heating during the winter.
Tim F 18.05.2017
Steve H 18.02.2016	I built my entire cozy IV using E-Z Poxy with EZ 83 hardner except for the fuel tanks I used the more fuel resistant slow hardner. It works great and is consistent plus it was always available to buy unlike some of the other systems.
Joseph A 10.10.2019	Awesome product. works well on my aircraft project.
James E 15.06.2014	E-Z POXY is the only resin I have used for Lay-Ups and structural work on my Velocity. I use the pump and have it set at 100-47. If the shop is at 70 degrees it will set up in 18-24 hours with the EZ 83 hardener. It is easy to mix by itÃ¢??s self or add Micro Balloons, Flox or Milled Fiber to mixed resin. On big jobs I use a carbon mask to not take in the fumes. It is cut able with a knife at 18 hours sanding 24-36 hours. I find the when mixed with Milled Fiber you need to let set for 36 hours or the sanding paper plugs up. The use of a heat gun really get it flowing if needed. It starts to get thicker in about 30 minutes so heat with the gun and flow out. I really like working with the stuff.
Roland 02.07.2020	easy to use. Ive been using it in temperatures just over 90 degrees, the pot life is a little less than two hours at this temp but I still have lots of time to get everything laid up how I want to. The cure time at this temp is less than 24 hours.
Christopher B 05.11.2020	I was disappointed when the web stated it was out of stock, but I received the order a couple of days later anyway. EZ-84, now 83, IIRC, is what 95% of my Velocity is constructed with.