Seems to work well. Handled the heat of soldering just fine. Would prefer a star or lock washer under the nut to address vibration induced failure.
Steve J
07.07.2019
Far too small for replacing the PTT switch on my PA28. Even if it worked, the switch itself is so small I think it would dig into my finger and quickly become uncomfortable to use.
Mark U
06.12.2018
A good switch, but keep in mind it is really subminiture small.
John S
06.06.2020
The switch is probably ok, but I cannot use it because of its small size. The descriptions on you web site were not helpful in selecting a proper replacement switch. I ended up ordering another switch from another supplier.
Ответ:For part number 11-01899 the body of the switch is 1/4" wide, the height of the PTT with button is 5/8" and 1/2" without button and the hole size for the PTT is 5/32".