The DOUBLE DUAL MAGNUM STROBE Driver is available in two models, the DDM 12 volt DC model and the SDDM smart model. The SMART Model simply means it can be powered by 10 to 80 volts of AC or DC. The 12 volt model is powered by the 12 volt electrical system of your aircraft.
The strobe bulb fires a rapid double flash on one head and then the other in an alternating pattern. The first flash catches the eye and the second identifies your position. Total flash rate is 74 per min.
Average current draw is less than 2 Amps. The driver measures 4 1/2" X 3 1/2" X 1 1/2" and weighs 10 ounces.
STREAMLINE COMBO heads are fitted with LED position lights. RED for left wing, GREEN for right wing, and each have a WHITE in the backside of the head for rear. These heads are machined form solid aluminum and anodize plated. Measuring 3 ¼" X 1" and weighing 2.8 ounces. They surface mount the same as the Standard Streamline head and here is a great feature, the 12 volt LEDs draw only 1/3 Amp of power per head.
Kit #1 For builders of RV 7, 9, & 10 aircraft or any other kit that has like mounted wing lights. Due to the wing light configuration on these aircraft, the white rear facing LED on the regular Combo head is of no use, because it can?t be seen from the rear. A white position or tail light is then needed. A set of special heads. They are STROBE and RED / GREEN Position light equipped heads WITHOUT the white LEDs, a 2 strobe driver box, that fires both wing strobes in an alternating double wink pattern, a white round LED equipped tail light to be mounted at the rear of the aircraft. Also, included is 50 feet of 5 conductor shielded wire for the wings, plugs, pins and mounting hardware. Total power draw for this system is about 2 ½ Amps at 14 volts.
Model Differences
Double Dual Magnum Driver Box Only 12VDC Driver Box Only 12 volt Model DDM-DO PN 11-05118
Double Dual Magnum Smart Driver Box Only SMART Model (10 to 80 volts of AC or DC) SDDM-DO PN 11-05117
Double Dual Magnum Driver Box with round clear Fresnel Heads Two Round Fresnel Heads, driver, 6? of 3 conductor wire, plugs, pins, and installation hardware (Tang Mount used on PPC, TRIKES, or where bolting heads to frame is desired). STANDARD 12 VDC Model with /ROUND FRESNEL heads DDM-RH PN 10-01610
STANDARD Smart Model with /ROUND FRESNEL heads SDDM-RH PN 11-04956
Double Dual Magnum Driver Box with standard streamline HeadsTwo Streamline Heads, driver, 50? of 3 conductor wire, plugs, pins, and installation hardware (includes adaptor plates for curved surface mounting if needed). STANDARD 12 volt Model with Driver and Two STANDARD STREAMLINE Heads DDM-SL PN 10-00824
STANDARD Smart Model with Driver and Two STANDARD STREAMLINE Heads SDDM-SL PN 11-04995
Two STREAMLINE COMBO heads, driver, 50? of 5 conductor shielded wire, plugs, pins, adaptor plates (for curved or flat surface mounting) and installation hardware. SONEX Aircraft adapter plates available at no additional charge when mentioned at time of purchase. COMBO 12 VDC Model with Streamline Combo Heads DDM-SLC PN 11-04835
COMBO Smart Model with Streamline Combo Heads SDDM-SLC PN 11-04957
Kit #1 For builders of RV 7, 9, & 10 aircraft or any other kit that has like mounted wing lights. Due to the wing light configuration on these aircraft, the white rear facing LED on the regular Combo head is of no use, because it can?t be seen from the rear. A white position or tail light is then needed. A set of special heads. They are STROBE and RED / GREEN Position light equipped heads WITHOUT the white LEDs, a 2 strobe driver box, that fires both wing strobes in an alternating double wink pattern, a white round LED equipped tail light to be mounted at the rear of the aircraft. Also, included is 50 feet of 5 conductor shielded wire for the wings, plugs, pins and mounting hardware. Total power draw for this system is about 2 1/2 Amps at 14 volts. DDM-RV Kit #1 PN 11-05833
