Overview

Features

• An essential part of your landing gear maintenance checklist is the need for periodic lubrication of hard-to-get-at door hinge bushings. Achieving proper lubrication is challenging because access is difficult. If these bushings are not lubricated regularly, corrosion will result. This can cause the bushing and sleeve to fuse together over time, resulting in problems with the door rigging and the operation of the aircraft. This could lead to an inoperable gear door or the cracking of the gear door - a safety issue for sure and at best, an expensive repair. Our kit is insurance against the possibility of future problems.
• The solution to this problem is AeroTough™ GF polymer bushings. These non-metallic bushings can be easily installed and will provide smooth grease-free operation. AeroTough™ bushings will never require lubrication. The polymer material is designed to incorporate its own lubrication. If someone doesn?t know our bushings have been fitted and decides to squirt some lubrication into the hinges, it?s no problem. Our bushings are quite happy to run in oil or grease ? it?s just not necessary!

Specifications

• Approved for installation in U.S. registered aircraft by Federal Aviation Administration Supplemental Type Certificate # SA03342NY.
• Approved for installation in Canadian registered aircraft by Transport Canada Supplemental Type Certificate # SA13-40.
• Reaming may be necessary, depending on any damage to the airframe (if damage is present, it is typically caused by corrosion of the OEM parts).
• Corresponding Baron/Travelair OEM Part #: LG-BSH001-1, LG-BSH001-3, 58-810022-1, 58-810022-3, 105739X-ZM0500, 105739X-ZP0500.
• List of approved Beech models: 56TC, 58, 58A, 95, 95-55, 95-A55, 95-B55, 95-B55A, 95-B55B, 95-C55, 95-C55A, A56TC, B95, B95A, D55, D55A, D95A, E55, E55A, E95, G58.

Manufacturer Q & A

Documents

• Installation Instructions
• Maintenance Manual Supplement

In The Box

• 8 pre-packaged door hinge assemblies for direct replacement of OEM parts at each hinge location (see diagram below). In addition, 2 shorter AN3-10A bolts are included in the kit to replace the 2 longer AN3-15A bolts in door configurations where the inboard forward door hinge fittings on the port and starboard sides of the aircraft are shorter. When the installation is complete, discard the 2 leftover bolts.
• Detailed installation instructions
• Maintenance manual supplement
• Copies of the US and Canadian Supplemental Type Certificates
• An Authorized Release Certificate confirming regulatory compliance

Videos

https://www.youtube-nocookie.com/embed/b2mnlALNF5c?rel=0

• Accessories
• Customers Also Viewed
• Frequently Purchased With
• Related Items

BONANZA AND BARON DOOR HINGE INSTALL KIT

$83.75

AEROTOUGH GF™ LANDING GEAR DOOR HINGE BUSHINGS SET FOR BONANZA AIRCRAFT

$388.00

PMA PRODUCTS INC. RAYTHEON / BEECH AIRCRAFT PARTS

$205.95

STORM WINDOW HINGE AND LATCH KIT FOR BEECHCRAFT

$224.00

BEECHCRAFT COWL DOOR CHAFE SEAL

$36.50

BEECHCRAFT KNOB SET

$228.95

BEECH CONTROL KNOB PUSH BUTTONS

$104.75

BEECHCRAFT MAIN LANDING GEAR DOOR SEAL

$79.75

BEECHCRAFT UPPER / LOWER WING SEAL KIT

$376.00

FLIGHT CONTROL CABLES

$136.75

EZ FLAP FAA/PMA FLAP HANDLE EXTENSION

$499.00

PIPER PA-32 FIBERGLASS REPLACEMENT AIRCRAFT PARTS

$923.12

STC'D J-3 WING TANKS

$706.00

BONANZA NOSE GEAR BRACE

$3895.00

YOKE MOUNT LIT CLIP BOARD DELUXE

$202.95

BEECHCRAFT MAIN GEAR BOLT

$342.00

CESSNA WING FABRIC CLIP

$0.75

CABIN ENTRY STEP
FOR CESSNA AIRCRAFT

$454.00

BONANZA AND BARON DOOR HINGE INSTALL KIT

$83.75

649983 TCM GASKET

$1.20

AA2J4-7 TEMPEST LINE MT FILTER

$37.95

WASHER, FLAT AN960-416

$0.04

AEROTOUGH GF MAIN LAND GR DOOR HINGE BUSHING SET FOR BONANZA

$388.00