SnapventÂ® - Model F325a

Артикул: 05-04088

5071 4226 руб.

Наличие: – Есть в наличии у нашего поставщика. Доставка на наш склад в течение 5...6 недель после оплаты Вами заказа.

Оплата и доставка

Overview

Adjustable plastic ventilators for use as fresh air intakes or air exhausts. Easily installed in plastic windshield or metal cowling.

Model F325A: Large tabs on lower flange and tapered profile make this vent ideal for higher airspeeds. Mounts in 3-1/4? diameter opening in plastic windshield or metal cowling.

Добавить отзыв

James R 08.07.2013	Easy to install and use. I think they are a good buy for the price. Regarding the previous review, perhaps they work better in some applications than others, but I was satisfied with the results.
Chris Z 13.07.2019	I purchased two pairs of these snap-vents for use on my Rally-cross GTI. I had replaced all my glass with lexan windows and needed a way to aid ventilation. After a brief google search I found these vents. Some have said that using the recommended 3.25 hole saw is not advisable as it makes the hole too big. This is not a fault of the hole saw size but excessive run out in your drill/or drill chuck. Use a good drill and go slowly and you get perfect results. I used an air drill.
Wayne O 27.05.2019	These vents were easy enough to install in my motorcycles windshield, and look like factory installed. Unfortunately, they didnt give me the airflow I was hoping for. I have a fairly long beard, and was trying to eliminate the Burble, which causes my beard to fly up into my face and field of view. Back to the drawing board I go. Thanks.
Brian 22.06.2018	Thank you very much for the quick response and delivery very satisfied with product thank you very much cheers
Chris L 17.05.2018	These vent fit too loose in an appropriate 3 1/4 hole. I had to order another set with the tension wire on them to fit correctly in my Cessna side window. I thicker acrylic window may be ok for them. Or drill an undersized hole. The snap vent itself is good quality but in my case fit way too loose
Harvey 18.03.2018	The installation was easy and the finished appearance is very good. I am satisfied that I have received exactly what I expected.
Chris C 07.04.2017	Greatly packaged and efficient service.
Bret A 20.02.2020	I have two of these, on my Mini-Max Eros. No matter how I position them, they will not stay shut with the engine just idling on the ground. I have yet, to fly the plane. Maybe they will close, with enough airflow. Any ideas to make them behave, would be appreciated.
Rick S 02.04.2020	Functions as designed good quality have used same item previously put in motorcycle winshields
David A 21.08.2020	Didnt have a 3-1/4 hole drill but i had a,3 inch. So i carefully exspanded the hole using a dremel tool . Installed into the lexan quite good. Simple solution for getting some air into my new designed door . I would recomend this product for lightsport aircraft