Exactly what we needed.

Needed to replace 2 leaking drain valves on Piper Cherokee Six. Ordered these from Aircraft Spruce. Great product, Worked as advertised.

Very good product and Service yo the client. Thank yoy best regards

Perfect fit and function. It is very difficult to get these things lined up to go into the wing, especially if gas is coming out while you are trying to put it in. Completely drain the tank or prepare to be gased.

Standard part and arrived quickly

Perfect fit. Works well. Used on Zenith CH 200 with Lycoming 0-320 E3D 150 hp.

Are just What I needed.

Works as advertised. Decent price point.

A simple and inexpensive part for a quick fix. It fits the wing tanks on the Piper PA 28 series, 1960s-1970s.

Excellent product, excellent price, excellent service!

Not much to say other than they wear out and need replaced and as such I usually keep two in my plane when traveling. The little o-ring is susceptible to wear and then leaks. Just part of flying

I would rate it five stars if the o-ring were replaceable.

Cheap, easy to replace work great.

Well - what do you want to rate at this part. It either works or not. In my case: I have installed it, and it doesnt leak. As expected.

Since the special seal is not available, the price on the valve is not too bad. Numerous applications.

These are the correct valves for circa- 1968 Cherokee 140/180 airplanes

works as advertised

Works great. It is a good idea to change these out every few years. I used the Ez Turn Lubricant as a sealer and it worked great. Be careful not to tighten them too much as the valve will become stuck.

As another Dave said these things are just part of flying a plane. I keep 2 spares in my plane as it doesnâ??t take much for them to start leaking. I would advise carrying vise grips as wrenchâ??s will strip that brass fitting.

Service is rated A+

Doesnt appear to leak

Great item, fast shipping and great to do business with

After just a few months the valve is already leaking. Itâ??s leaking about a drop every 24 hours. Iâ??ve had good success with these valves in the past. May be a manufacturing defect.

Great people and products

Your good service and on hand supply of your advertised products just keeps getting better. Keep your Mach up Jim. You are doing a great job. John

First one installed leaked. Had to cycle valve several times to get proper seating and seal. I am not confident in this product.

The valve itself is great quality. BUT, the reason I purchased them was because of the failure of the seal, which according to information available, the seal/packing is not available for replacement I did use either an MS 29513-006 or -007 to test. Although it fit, and did not leak, since it was not called out as a replacement I opted to purchase new replacement Curtis valves CCA1550 & CAA 1600 for my Tri Pacer.