Наборы колес и тормозных систем
Kit 1: 2.5 oz cartridge (Fill: 2 oz. sealant) Kit 2: 6 oz cartridge (Fill: 3.5 oz. sealant) Kit 3: 6 oz can (Fill: 16 oz. sealant) CS3204 is a fuel resistant sealant for use on integral fuel tanks and pressurized cabins as well as other areas subject to contact with aircraft fuels, lubricants, oils, water and/or weathering.
|
Norm 24.11.2018 |
Had a leak in an integral aluminum fuel tank that hadnt been sealed properly since built. Worked superbly. |
---|---|
Neil C 14.09.2018 |
Used sealant to repair obsolete 30 year old plastic fuel tank |
Frank S 25.05.2018 |
|
Joe S 06.04.2018 |
I really like this product. I use it at work on aircraft, and purchased it here to use at home on my airstream trailer renovation. |
Terry B 16.03.2018 |
Worked as advertised. Used the mixing tool in my drill and mixing was easy and fast. So far fuel tank is sealed up tight and nothing leaking. Hope it lasts for many years to come. |
James S 16.03.2017 |
Addition... Mixing: I clamped a slow speed drill (pointing up)in my vise and chucked a hole saw (backwards) that had holes that (nearly) matched the plunger handle of the tube. A couple of #8 screws, and I now had a power mixer. Turn on the drill (CW) and move the tube full stroke up and down 50 times (overkill) or so. Dispensing: Like a previous reviewer, I just used a cheap $5 gun.. mine didnt even require making the plunger diameter smaller.. it fit perfectly... |
James S 16.03.2017 |
Used this (B-2)for sealing the fuel sending unit into the side of a wing tank. All is well. I would probably use the faster version next time (B-1/2). Cures very flexible, not as hard as Proseal, but it is a polysulfide product (like Proseal) so we will see how long it lasts. |
Dana R 24.01.2017 |
Although I waste more than I probably should, I never have any issues with these kits not curing properly. I bought a cheap caulking gun and ground the ram down a bit on my bench grinder so that it fits the plunger on these tubes. Presto! $5 proseal gun! (use a zip tie to make sure the tube stays anchored in the cheap big-box store caulking gun) |
Chet R 03.06.2015 |
This sealant works awesome. It cures to a hard rubber and really seals. After trying a different sealant and it not working, I was desperate to find something to seal up my fuel tank. This stuff fit the bill and is completely leak free. |
Ken K 18.06.2014 |
...make sure the metal is bare and clean, i had a wing tank neck/nipple that i had to have a welder extended higher to work with my newly built wing tanks, after welding he gave a shot of spray paint on where he buffed the metal. After i threaded the nipple/neck into the top of the wing tank, I smeared the sealant on the inside of the nipple at the junction of the threads in addition to putting sealant on the fine threads. The sealant i had on the smooth part of the inside of the nipple started to lift because of the spray paint the welder put on after welding. |
Ken 16.05.2014 |
The brand I used says Flamemaster on the tube, which comes in a plastic bag. On the bag it says NSL Aerospace and shows a website www.nslaerospace.com the fuel fittings I used it on and even on my rubber dust cover where my wing tank fuel neck comes up through have all held out Excellent since I put it on last summer, and is still nice and flexible around my fuel neck nipple. I also used some to seal a rubber grommet on top of my white plastic football fuel tanks on my Ultralight and thats still Excellent. |
Ken K 21.09.2013 |
I used it again with Excellent results, this time I was more aggressive with the mixing giving it more than the recomended min 50 strokes and like it says on the packaging extra mixing may initiate curing of sealant inside the cartridge...which it did, as I noticed it got hard to push it out of the cartridge ( I was just using my thumbs to push it out of the cartridge as I don't have the cartridge gun or know where they sell it ??) but I still had plenty of time to get what I needed out of the cartridge for my job on my new fuel tank...it works no leaks on the NTP threads !! Its too bad they don't make smaller tubes to eliminate waste, because once its mixed you must use it, as the stuff left inside the cartridge sets up to a rubber like solid compound within hrs or overnight. |
Ken K 13.09.2013 |
You must not have mixed it properly I used it twice and it cured within 4 hrs to where I was forced to open a new tube cause it cured enough that when I need more it was set up in the tube after 4 hrs in hot weather. |
John R 16.01.2020 |
Works well as expected. |
Richardo 03.01.2014 |
I received two brands. One is Flame Master Chem Seal CS3204 from National Sealants & Lubricants and is excellent even after one year of storage it cures in one day at 28ðC cures to a hard flexible rubber shining surface. The other brand was A-C-Tech AC-226 B4 from Advance Chemistry & Technology , and it didn't cure after 14 days just became less sticky. |
Bens M 30.01.2020 |
Great product, works as described |
William W 25.01.2020 |
Convenient size for small jobs. Getting it between 70F and 80F before mixing makes the mixing very easy. The product can be pushed out with a thumb and does not require anything other than the packaging to mix and apply. |
Leo K 20.05.2020 |
Easy to mix without the use of special tools. I pushed the product out of the tube using a socket and extension as a pushrod. The Class B2 has a working time of 2 hours and a cure time (at 77 deg F and 50% RH) of 72 hours. Product worked as expected and seems to retain a little flexibility. |
David L 07.07.2020 |
Perfect for sealing our fuel tank fuel level float and attached fittings. Long work life as advertised |
Geoff S 14.08.2020 |
Fast Delivery, shame the freight is so expensive. |
Alan Z 16.09.2020 |
Highly recommend this product for sealing exterior pin holes on fuel bladders. Material can be applied on vertical surfaces and does not run or sag. Comfortable working time on previously prepared surfaces. Product has excellent surface bonding characteristics. Product appears to be resistant to ethanol blended fuels. Advise doubling recommended curing times |
Ответ:It has a service temperature range from -65*F (-54*C) to 250*F (121*C), with intermittent excursions up to 275*F (135*C).
Ответ:The tech data sheet only refers to aviation and jet fuel. It has been used in race vehicles that use many alcohol type additives without any known problems, but the supplier will not recommend it since it has not been lab tested.
Ответ:The shelf life is 9 months from date of packaging.
Ответ:It will be flexible when cured, but we recommend verifying with the bladder manufacturer this material can be used.
Ответ:Per our product support manager: The user would have to pump and twist the ram manually by hand. The mixing tool saves a lot of time and effort.
Ответ:Proseal has been used in ethanol applications, but the manufacturer has no documentation to provide to show how well, or how long, it will work.
Ответ:This will adhere to a plastic tank but will eventually breakdown because of the gasoline. This is mainly used for aluminum and titanium steel. This would not be recommended per supplier for a plastic tank.
Ответ:After the cartridge has been mixed, you can use a manual dispensing gun, p/n's 12-38520 or 12-38530, or an air-powered gun like 12-02923, 12-02922, 12-02921, or 12-02920. A Semco, or other common caulking gun is not designed to be used with these sealant cartridges.
Ответ:It is self contained, and designed for a one time use. The two parts, A&B, are already properly measured, so the two parts are mixed in the cartridge until one uniform color and then you install the nozzle, and push rod, then just apply to the area.
Ответ:This will all depend on how thick you are applying this. However there is a formula that will help, if you apply this to an area that is 1" cubed so 1" length x 1" height x 1" depth, it would use exactly 1.8047 fluid oz.
Ответ:CS3204B2 cures in 72 hours given the following: Specified application and cure schedules are based on the standard conditions of 770F and 50% relative humidity.
Ответ:Per the data sheet the cure can be accelerated by heating up to 120 degrees.
Ответ:It does not specifically list diesel but it will work with most fuels, oil, lubricants, and water.
Ответ:You would use Methylene Chloride for cleaning up excess sealant.
Ответ:No this is not the low adhesive product.
Ответ:Technically there is not a minimum temp. The colder it is the longer it will take to cure and ideally you would want to be as close to 77 degrees as possible. Just allow extra cure time the colder it gets.
Есть в наличии у нашего поставщика. Доставка на наш склад в течение 5...6 недель после оплаты Вами заказа.
от 21714 18095 руб.
Есть в наличии у нашего поставщика. Доставка на наш склад в течение 5...6 недель после оплаты Вами заказа.
от 20479 17066 руб.
Есть в наличии у нашего поставщика. Доставка на наш склад в течение 5...6 недель после оплаты Вами заказа.
от 110 92 руб.
Есть в наличии у нашего поставщика. Доставка на наш склад в течение 5...6 недель после оплаты Вами заказа.
от 976 813 руб.
Есть в наличии у нашего поставщика. Доставка на наш склад в течение 5...6 недель после оплаты Вами заказа.
от 55 46 руб.
Есть в наличии у нашего поставщика. Доставка на наш склад в течение 5...6 недель после оплаты Вами заказа.
от 63 53 руб.
Есть в наличии у нашего поставщика. Доставка на наш склад в течение 5...6 недель после оплаты Вами заказа.
от 3628 3023 руб.
Есть в наличии у нашего поставщика. Доставка на наш склад в течение 5...6 недель после оплаты Вами заказа.
от 46535 38779 руб.
Есть в наличии у нашего поставщика. Доставка на наш склад в течение 5...6 недель после оплаты Вами заказа.
от 60 50 руб.
Есть в наличии у нашего поставщика. Доставка на наш склад в течение 5...6 недель после оплаты Вами заказа.
от 10090 8408 руб.
Есть в наличии у нашего поставщика. Доставка на наш склад в течение 5...6 недель после оплаты Вами заказа.
от 2536 2113 руб.
Есть в наличии у нашего поставщика. Доставка на наш склад в течение 5...6 недель после оплаты Вами заказа.
Артикул: 09-04008
28592 23827 руб.
Есть в наличии у нашего поставщика. Доставка на наш склад в течение 5...6 недель после оплаты Вами заказа.
от 2731 2276 руб.
Есть в наличии у нашего поставщика. Доставка на наш склад в течение 5...6 недель после оплаты Вами заказа.
от 1028 856 руб.
Есть в наличии у нашего поставщика. Доставка на наш склад в течение 5...6 недель после оплаты Вами заказа.
Артикул: 09-05742
300 250 руб.
Есть в наличии у нашего поставщика. Доставка на наш склад в течение 5...6 недель после оплаты Вами заказа.
от 6632 5526 руб.
Есть в наличии у нашего поставщика. Доставка на наш склад в течение 5...6 недель после оплаты Вами заказа.
Артикул: 12-01792
4889 4074 руб.
Есть в наличии у нашего поставщика. Доставка на наш склад в течение 5...6 недель после оплаты Вами заказа.
от 3628 3023 руб.
Есть в наличии. Отправка к Вам в тот же день, если оплата заказа сделана до 14-00 Московского времени.
от 10909 9091 руб.
Есть в наличии у нашего поставщика. Доставка на наш склад в течение 5...6 недель после оплаты Вами заказа.
от 4551 3793 руб.
Есть в наличии у нашего поставщика. Доставка на наш склад в течение 5...6 недель после оплаты Вами заказа.
от 16 14 руб.
Есть в наличии. Отправка к Вам в тот же день, если оплата заказа сделана до 14-00 Московского времени.
Артикул: 05-01869
4031 3359 руб.
Есть в наличии. Отправка к Вам в тот же день, если оплата заказа сделана до 14-00 Московского времени.
от 10909 9091 руб.
Есть в наличии у нашего поставщика. Доставка на наш склад в течение 5...6 недель после оплаты Вами заказа.
от 21714 18095 руб.
Есть в наличии у нашего поставщика. Доставка на наш склад в течение 5...6 недель после оплаты Вами заказа.
от 32 27 руб.
Есть в наличии у нашего поставщика. Доставка на наш склад в течение 5...6 недель после оплаты Вами заказа.
от 430 358 руб.
Есть в наличии у нашего поставщика. Доставка на наш склад в течение 5...6 недель после оплаты Вами заказа.
от 6632 5526 руб.