272-1 Slick Air Low Drag Aircraft Coating Kit
Артикул: 09-03754
11848 9873 руб.
Наличие: – Есть в наличии у нашего поставщика. Доставка на наш склад в течение 5...6 недель после оплаты Вами заказа.
Overview
| It?s not a wax and it?s not a polish, it is a coating which was specifically designed to reduce air drag. It is a revolutionary coating that has a non-reactive inert surface that is very slippery. It reduces air drag because it has a very low surface energy which allows the air molecules to slip at the surface. This partial slip condition increases the air velocity at the surface. In a typical boundary layer profile the air velocity at the surface is zero and increases exponentially until, at the outer edge of the boundary layer, it is the same as the free-stream velocity. The shape and magnitude of the boundary layer?s velocity profile determines the momentum loss, which corresponds to the drag. The higher the velocity near the surface, the lower the air drag. It is as easy to apply as any liquid car wax but with much less elbow grease required. It is like having three products in one. A cleaner to remove tar, tree sap, stains and pollutants, a micro fine leveling agent to level and remove fine scratches and blemishes on clear coats and dead paint on single stage finishes. A durable yet breathable clear protective coating. It protects against fading, acid rain and harsh airborne pollutants. It is safe for use on cured paint, fiberglass, glass, chrome and plastic surfaces. It has the following features; gives a shine like a wax; non-stick surface; easy to clean; reduces adhesion of dirt and insects; creates a water-repellent finish; gives UV protection; drastically reduced ice adhesion. It is like having three products in one. A cleaner to remove tar, tree sap, stains and pollutants, a micro fine leveling agent to level and remove fine scratches and blemishes on clear coats and dead paint on single stage finishes. A durable yet breathable clear protective coating. It protects against fading, acid rain and harsh airborne pollutants. 272-1 contains eight ounces of Slick Air and application instructions. The 8 oz. container has enough Slick Air to cover an aircraft the size of a single engine Cessna. This coating will last approximately one year if the aircraft is in a hanger and about six months if left outdoors before reapplication is required. Coating the aircraft with Slick Air gives the aircraft a wax or polished looking finish and an increase in speed of approximately 2 to 3 MPH. So not only does one get the advantage of faster speeds but also gets all the benefits listed in the paragraphs above. This coating does not require an FAA approval therefore it can be applied to all aircraft type certified or not. |
